JVC Everio GZ-MG360 HDD Camcorder - Answered Questions & Fixed issues

You may try this camcorder recovery tool named asoftech data recovery which helped me before. You can download trial for freehttp://www.asoftech.com/adr/Please be noted that your camcorder memory should show as a drive letter in your explorer, if not, you need to take out your memory card and connect using a card reader, or plug-in to card reader slot if there's any on your computer.

The GZ-MG360 takes microSD cards. Make sure you get a microSD card, not a microSDHC card. While a microSDHC card will fit into the slot, it is electronically incompatible and will not work. microSD cards go up to 2GB in size, microSDHC cards start at 4GB and go up.

yes remove the hard drive, connect to a computer and use a special recovery software

There is a fault in the internal voltage regulator circuit which would need to be looked at by a service company to repair.

Its possible that you have some problem with the software and will need to reinstall. Are you try reading the device as external "memory card"?Try it.

You can download the software from JVC's website.

http://support.jvc.com/consumer/custrel/index.jsp

Hi you can download pictures from your camcorder by connecting the data cable that has been given with the camcorder. Install the setup cd given with the camcorder and do the installer which helps in easy sharing of pictures and videos.
Thanks

You can download a recuperation software, usually I use Recuva which is free and can be found quickly on the net it's from Piriform.
It works well for pictures and video and is easy to use, simply select the drive you want to search for deleted files and lunch it.

Remember that to maximize your chances you shouldn't use the drive you deleted stuff from before trying the software, that will prevent information to be overwriten.

MOD Converter is an all-in-one mod video conversion tool that lets you transcode MOD video from Canon/JVC/Panasonic camcorders right on your computer. MOD Converter can convert most input files including MOD, WMV, MPEG-1, MPEG-2, HDTV TS, VOB, AVI, FLV, MOV, MP4 to DivX to windows media avi,wmv,mpeg1,mpeg2 that usable on windows media palyer and windows movie maker.
http://www.iorgsoft.com/Mod-Converter/

lost my JVC camcoder gr-d350as driver, can you help me download it? Thanks.

According to the manual, the GR-D90 works with MMC or SD cards. Your new 16GB card is actually an SDHC (Secure Digital High Capacity) card. While SDHC cards will fit into an SD slot, they are electronically incompatible and will not work. SD cards max out at 2GB in size.

Power off your camcorder, take the memory card or hard drive out of your cam, and connect it to your computer as it should appear as a "Removable Drive" or put the card in a card reader attached to your PC.

Then install this software Wondershare Photo Recovery (recover videos and audio files too) on your computer. Then start to scan and see if your deleted files can be got back. Get the program from:

For Windows Version
For Mac version

Remember - Do NOT try & write anything back to your camcoder(card or disk) until you can recover your files safely! Good luck!

YES. You have chance.
First things first: DO NOT take any more videos or pictures with the camcorder(memory card) that you want to recover files from in case you may quite possibly ruin the chances.

Then take the memory card or hard drive out of your cam, and connect it to your computer as it should appear as a "Removable Drive" or put the card in a card reader attached to your PC.

Then install this software Wondershare Photo Recovery (recover videos and audio files too) on your computer. Then start to scan and see if your deleted files can be got back. Get the program from:

For Windows Version
For Mac version

Remember - Do NOT try & write anything back to your camcoder(card or disk) until you can recover your files safely! Regards

YES. You have chance to get those deleted files back provided not overwritten.
First things first: DO NOT take any more videos or pictures with the camcorder(memory card) that you want to recover files from in case you may quite possibly ruin the chances.

Then take the memory card or hard drive out of your cam, and connect it to your computer as it should appear as a "Removable Drive" or put the card in a card reader attached to your PC.

Then install this software Wondershare Photo Recovery (recover videos and audio files too) on your computer. Then start to scan and see if your deleted files can be got back. Get the program from:

For Windows Version
For Mac version

Remember - Do NOT try & write anything back to your camcoder(card or disk) until you can recover your files safely! I hope you good luck!

First things first: DO NOT take any more videos or pictures with the camcorder(memory card) that you want to recover files from in case you may quite possibly ruin your chances.

Then take the memory card or hard drive out of your cam, and connect it to your computer as it should appear as a "Removable Drive" or put the card in a card reader attached to your PC.

Then install this software Wondershare Photo Recovery (recover videos and audio files too) on your computer. Then start to scan and see if your deleted files can be got back. Get the program from:

For Windows Version
For Mac version

Remember - Do NOT try & write anything back to your camcoder(card or disk) until you can recover your files safely!

The bundled software is the Everio Media Browser by Pixela. It makes it very easy to find video on your camcorder and import it to your computer. Then, it allows you to do basic editing. Finally, the software makes it simple to upload to You Tube, Export to iTunes, or Burn to DVD. You can purchase a replacement at: http://www.jvcservice.com/Store. I however recommend you just use Windows Movie Maker, which is free.

Hi,

You can download and print the complete instruction manual in PDF format by clicking this link:

http://resources.jvc.com/Resources/00/01/13/57.PDF

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.

Thanks for using FixYa.

http://www.latestdriversupdate.com/driver/35271.html

I got the above by searching under 'gz-mg360 driver' on the Internet.

First check the computer operating system for compartibilty requirements with external devices. For example, computer would specify least compartibility with certain brands like microsoft least expected to function with apple devices is an only mentionable example of compartibilty situations. Also, check the camcorder for compartibilty with computer sysems. For example, cameras would usually specify the functionalty features where it is possibe connect digital cameras with computers and not camcorder expected to functions separate entities. Refer to the camcorders user guide to ascertain details contributing towards acquirng user experinces.

hi i dont know