20 Most Recent
Sony Cyber-shot DSC-T70 Digital Camera - Page 7 Questions & Answers
When i connected cybershot dsc
Hi,
You firstly need to verify your camera is reading the Memory Stick properly in the camera.
There should be a memory stick logo next to the amount of pictures you can take on your screen
If you are positive your Mem Stick is working and pictures are on there then Check
your MyPictures area on your System or your MyDocuments Area. You can
access these areas by clicking on your MYComputer Icon.
If you think the pictures never transfered then remove the stick from the PC and re-insert it. Try this a couple times. Sometimes the PC for whatever reason will not read the card and a simple Reboot usually clears up the problem.
Don't know how to turn
If you don't have the option of the flash on the middle right, then click on DISP on your right down corner and then click on "NORMAL" , and close it , now your are about to see the flash image (like a thunder) click on it, and choose one.
How to change the language
Well, turn it on, then clickon "Home" on the left up corner, then go to the last optiong that looks like a bag image and click on it, then click on the right down corner that has an image of the letter "A", click ok "that you are sure that you want to change it" click on the only one option then click OK again , there you are ENGLISH , FRAN?AIS, ESPA?OL, ITALIANO and the other ones.
___________________
IF you dont have the "Home" option on the left up corner, then you have to click on DISP on the right down corner and then Set the first option that in english says "Normal" then close the window... Now you are able to do the tip up here /\.
Good Luck.
My memory stick doesn't stay clicked in in my Sony
Hello
if memory stick is not working then it is better to replace it, because if the product was OK then it has to work, as the stick is new then you have the opportunity to replace it, and take the camera with you to check new one in camera,
if you dont want to replace then check this stick to card reader and if card reader detect it then format it there and then place it again to camera.
Hope this helps, if so do appreciate my effort by rating the solution Good Luck, Cmptrlink
My sony t70 shakes/ vibrates
On Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining the process ..........
Camera vibrates
On Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining the process .........
Mi camera sony cybershots vibrates,
On Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining the process ........
My camera dsc-t70 vibrates when
On Sony T100 and similar,
its the vibration canceling unit, i had the same problem.
if you have good hads you can fix it.( on your oun risk)
1) disasamble the camera, you will see black plastic box inside, this is he lens unit.
2) on the botom you see 2 scrwes, they are holding the CCD remove them and the ccd unit will come from the lens assembly
3) the next is the stabilizer unit it is the problematic one. it is located on the left side of the lens asebly and is held by 2 screws.
you can test it by puling out the cable connected to it (the conector is just under the lens) and verifign that the problem is solved. ( you can leave it this way it will shoot fine just without the anti shake)
4) to fix it take it out ,remove the plastic cover, you see the lens on a plastic mount it should be glued to the magnet under it. the problem is that the glue fals apart.
remove one of the pins on wich it slides, and take the lens and the magnet out.
5) reglue the magnet and reasemble the camera.
6) power up and test, for me that solved the problem
if you need more help you can mail me at adisarit(et)yahoo(dot)com this is spam mail so be prepared to wait a few days for reply.
i have a document with pictures explaining the process .......
How to disable the vibrate function in my sony
Hi,
There is no option in the DSC-T70 Camera to enable or disable the vibrate option. The vibration in the Camera is a malfunction. The Camera may experience an issue where an abnormal internal vibration and an inability to properly focus and take pictures. Try the following troubleshooting steps and check if the issue can be resolved.
Follow the steps below to perform a manual power reset.
Turn off the Camera.
Remove the battery pack.
Press and hold the power button for 30 seconds.
Allow the Camera to remain without power for 60 seconds.
Re-insert the battery pack.
Turn on the Camera.
If the issue persists after the power reset, then reset the Camera back to factory default.
To reset the Camera back to factory default, select the INITIALIZE option under Main Settings 1 Menu of the Camera to OK. (HOME-->SETTINGS-->MAIN SETTINGS-->MAIN SETTINGS 1-->INITIALIZE-->OK).
If the issue occurs again, then service may be required.
Thanks for contacting FixYa.
We wish you a Happy Holiday Season.
IS IT NORMAL FOR A
To stop your camera from vibrating, you have to disable the vibrate function in the system setting. If the vibrate function is already disabled and the problem still occurs, you have to refer your camera to a certified technician there is a problem in the command center of the camera.
How to use change resolution
Hi,
The screen resolution of the Camera cannot be changed. The option in the Camera is to change the Image size which will increase the MegaPixel rate of the Camera. This can also be called as resolution. This can be changed by touching the Image Size icon displayed on the Camera screen. The settings available for Still Image Settings and Movie Image Settings in the DSCT70 Camera are given in the image given below:
Thanks,
KenSolutions
FixYa
When the camera is exposed to hot temperatures 100
There is steady shot mechanism located at end of lens assembly, that mechanism gone bad and vibrates, replacement of that mechanism will fix your camera issue.
Local camera repair shop will do this job as camera will take apart to replace defective part.
Thanks.
Why does my Sony cyber-shot
There is some steady-shot mechanism in camera lens that start vibrating due to some reason, this mechanism will be replaced to fix your camera issue.
It is not user level fix so take it in local camera repair shop.
When I turn my camera (DSC - T70) on, I get a
try pressing the reset button(small hole when you open the slide) just use any pointed thing to press the button inside. (dont worry , its not going to delete anything from your pictures. :)
How to change language in
press menu and go to the 6th tab ( click the down arrow 6 times and you'll see language settings) its the only option on the 6th tab :)
Not finding what you are looking for?