20 Most Recent
Canon PIXMA MX850 Multifunction Printer - Page 6 Questions & Answers
How to put in new
Hi there!
It should be very easy to replace the ink cartridge of your printer. You can follow the simple steps found on this
PIXMA MX850 manual.
Best regards!
Mx850. not printing green or
Hi,
Try Doing A head-Cleaning.
If you have the correct Software/Drivers et,c Installed.
Try Printing A test Page, or Doing A head-Clean.
You may Have Clogged Or Blocked ink.
A clean ( Via Program ) may solve This.
Mike.
I have a MX850. My
Thats right. All the cartridges must have ink before the machine will print. Sorri.
The fax won't fax.
We would
Hi,
Pls go thru the below Link
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx850#BrochuresAndManuals
The paper jams when I try to print. It will not
Paper jams
85% of paper jams are caused by worn rollers . The rubber treads in the rollers wears down, making them smooth, so they won't pick up the paper. Sometimes, they are aged, which also gives them a smoother rounded texture, causing jams. The quick fix is to liven up that roller with a mixture of alcohol and soap. Damp a rag with the solution and wipe the rollers clean with it. That's make them more pliable and the paper jams will cease.
Open the Rear Cover.
If you can see the jammed paper, slowly pull the paper out.
Clean the rollers in the rear section too.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Error b200
try installing the driver again. If you lost the cd try this other installer on their support site
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx850?selectedName=ServiceAndSupport#DriversAndSoftware
-Click the driver & software
-choose your operating system
-choose from the list below.
hope this helps. thank you for using fixya!
Canon MX850 Original problem was error 6A00 which
Sometimes releasing this lock leaver causes the far side of the print head mechanism to sit out, moving the contacts ever so slightly. Release the leaver again, using a bright torch make sure the cradles are sitting correctly and the circuit board that has the contacts for the cartridges on it has not moved. this leaver holds the entire assembly together and if it is not positioned correctly, it wont work correctly!!
Regards
GM
I get a B200 and
In the service manual write this
The internal temperature exceeded the
specified value.
- Print head
- Carriage unit
- Logic board
As technician i say first time to replace the print head,90% the prin head is the problem,if the problem persist after replace the logic board too.
If i have been useful pls give me a vote :).Thanks
Canon mx850 Error code 6A00
Hello thank you for using FixYa.
The 6A00 is a Canon generic code for paper path jam.Some where in the
paper path a sensor is activated indicating paper jam so the printer
will give off a 6A00 code.As a Canon technology,I usually find the code almost 90% of the time it is related to the purge unit being jammed with
something and not being able to move.Moving the print head assembly
will not clear a purge unit if its jammed with paper,paper clips,push
pins,screws,cookie crisp,flower bud pods etc.
I have
found all those things in a purge unit.The offending item needs to be
removed or the purge unit needs replacement.A Canon Pixma MX850 Printer would still
be under Canon warranty, get it into a shop and save yourself the
hassel.
Incidentally, the 6A00 error pertains to all Canon printers
made in the last several years, its not just used in one model & its
always a paper path error or purge unit
I forget myself so here
goes, the purge unit,called a spittoon assembly,where the print head assembly parks when not
in use, also its other job is to clean and make sure the print head is
clean and open for printing.That is why you will find the print head
assembly parked on top of it. It also has a an electrical pump to milk
the print heads and test for ink flow
For Further assistance, I am here to help.
Thanks and Keep exploring FixYa
My printer only prints a
Hi sounds as if you have a partly blocked print head
do a clean from your PC in printer properties if that's no good replace the print head by going to amazon and looking for Canon PIXMA MX850 print head, easy to fit but not cheep
hope this helps yours Ian
Mx850 canon all in one. was working fine then the
6A00] or Light blinking 12 times = AP position error. It's mean there is an error occurred in the AP motor during purging operation. You may need to replace Sheet feed unit, logic board or purge unit. Thank you
Not finding what you are looking for?