HP Officejet H470 InkJet Printer - Answered Questions & Fixed issues

Hello, First take the cartridge out and dab on a slightly damp paper towel and reinstall, and power down printer and try. If that doesn't work you will have to replace the black cartridge.

Perhaps you mean this? Use a PDF reader like Acrobat reader from Adobe to open it. http://www.hp.com/ctg/Manual/c01272430.pdf

http://support.hp.com/us-en/product/HP-Officejet-H470-Mobile-Printer-series/3434453/model/3434454/document/c01463304/

Hello Thea, Please click HP Officejet H470 Mobile Printer Drivers to access page where you can select the OS and then download the drivers.

I think your image size is too large. when you command your printer to print the image. choose the paper size on which you want to print it.operating system will automatically set the image size to the paper size

the filter is not running the ink and that means that the service station might be faulty, get a technician to have a look at the unit

get a technician to service the printer the service station might be faulty

No, it can be because of dust or might be need some oil as well. it can be fixed, just clean the printer.

Hi, i have here some possible solutions that might be of help to you. Please click on this link:
https://h10025.www1.hp.com/ewfrf/wc/document?docname=c01554876&tmp_task=solveCategory&lc=en&dlc=en&cc=au&product=3434455
i hope this helps.

I would suggest the app Print Bureaits kind of expensive($20)works with i think all printers i thinki have not had any problems so far

Open the tap of the printer, they should move.

The issue is with your router. Without knowing anything else about your network equipment I can tell you the following.

The lease on the network address for the printer keeps expiring or another machine on your home network keeps taking the address while the printer is still leasing it.

The solution is to access your router's configuration page and basically reserve a network address for the printer.

That way when the lease for the printer's address is up, the router will just re-assign that address to it. Your computers also won't need to re-install the printer either because it will always have that network address.

As for another machine taking the address, you'll want to make sure that all the computers that connect to your network are set to dynamic (DHCP) network addressing. That should keep your printer online for a good while.

Hello. It is very unusual that you dont have this tab (top right corner of printing preferences)
This could indicate that you are using a generic driver and not the latest from HP. You can download this driver from there web site and the services tab should appear. This is the only way to check the levels.
Regards GM

The paper pick up fingers and rollers get smooth and polished with use and then slide on the paper. Clean the rollers and pick mechanisms with isopropyl alcohol to rejuvenate them and restore their grip on the paper. Do this as far along the paper path as you can get, using Q Tips where necessary and turn the rollers to clean their whole surfaces.

first to out the jam paper and to press OFF switch on printer press

If you have a USB memory stick (Flash Drive) you can copy the contents of the CD to that and then run the setup program from there. If you don't have a PC with a CD drive you could ask a friend/colleague to copy the cd onto the stick for you.

Hello,

What you need to do is to set it online. Here's the procedure on how to do it.

1. Go to start>control panel>hardware and sound>printers
2. It will show you a list of the installed printers in the computer.
3. Right click on the HP printer and click on online.

Check to see if there is anything jammed inside of the printer. If not, send this in for warrenty repair.

Welcome to Fixya!

Might I suggest downloading and install the latest drivers for your printer. See my published guide entitled How to Install the latest drivers for Hewlett Packard Printer!!!
It is possible that the unit is out of range, try moving it closer to the receiver!

Thanking you
damnor01

More than likely the print resolution is set to it's highest setting. In the printer settings change it to 'Normal' or 'Fast Normal'. It will print fast then. Hope this helps you.