Franklin Industries Franklin Chef FIM200 Ice Machine - Answered Questions & Fixed issues
Machine runs cold water but will not make ice,
Check the condenser coil to make sure it is cleaned out, also make sure the condenser fan is no dropping out. Next check to make sure the water fill valve is not seeping water past into the sump tray if so than it will not freeze, Water will get cold but not cold enough to freeze check water temp in sump tray with a thermometer to make sure it is getting down to 32 deg.
7/10/2014 4:43:57 PM •
Franklin...
•
Answered
on Jul 10, 2014
•
618 views
How do I clean my FLM70 ice maker
Google Franklin chef FIM70 Ice maker- compactAppliance.com, click on page scroll down page until you see Download product owner's manual ( PDF ) this will give you step by step instructions on how to clean your machine, The machine should be cleaned every 6 months. If cleaning dose not help with the problem than you need to look into a harvest problem.
7/10/2014 4:08:02 PM •
Franklin...
•
Answered
on Jul 10, 2014
•
163 views
Fim200a does not make the cubes large enough
If you just started having this problem now and it was making the right size ice before then i would first look at cleaning the ice machine including the condenser coil. second thing make sure that the water inlet valve is not seeping water by when it is in freeze mode just a little warmer water will cause it to not make good ice and a longer freeze time. last thing would be to adjust the I.S.Adjust: Ice size adjustment on the control board. Turn screw clockwise, and the size of individual ice cubes will be larger in the next cycle; the cycle time will be longer. Turn the screw counter-clockwise, and the ice will be smaller in the next cycle. only do this if every thing ealse checks out good.
7/10/2014 2:07:54 PM •
Franklin...
•
Answered
on Jul 10, 2014
•
143 views
My franklin chef FIM200 is
Try putting a compression coupling in eliminating the valve. Did that on my machine a few months back, have not had any more leaks. Just other issues with thick ice and won't harvest correctly. Any suggestions?
2/1/2011 3:41:26 PM •
Franklin...
•
Answered
on Feb 01, 2011
•
258 views
Ice freezing onto to upper
Time to give it a good cleaning. If you use the wrong cleaner on the plate, it etches it and causes the cubes to stick.
1/9/2011 10:41:36 PM •
Franklin...
•
Answered
on Jan 09, 2011
•
254 views
FIM70 Makes ice but does not drop. Forms large
don't know if you solved this, but we had a similar situation.
Leave the machine off until all the ice melts off the cups.
You need to take off the front cover and adjust the sizing down a good quarter turn. Let it start making ice and make sure all the ice drops. If it doesn't size it down more. If it all drops and the ice is too thin, turn it up VERY little (2° or so). Keep adjusting until you get the size you want but still get all the ice to drop.
8/6/2010 1:55:06 PM •
Franklin...
•
Answered
on Aug 06, 2010
•
401 views
We have a new out of the box machine and the water
if you put water in the tank, water won't come in until the tank is low. plus, it should be cold water. the manual should provide you with information about any plug or what needs to be done before making ice. the manual is invaluable.
7/31/2009 1:23:43 PM •
Franklin...
•
Answered
on Jul 31, 2009
•
198 views
Where can I foind technical
what part are you wanting, water inlet is usually 3/8 npt, this unit can use 1/4 to 3/8 inch line
1/23/2009 4:15:55 AM •
Franklin...
•
Answered
on Jan 23, 2009
•
449 views
Maplin N20FR - damp test meter. I have no
N20FR - Used to measure the moisture level in sawn timber (also cardboard, paper) 6 to 44% on the left hand scale and hardened materials (plaster, concrete and mortar) 0.2 to 2.0% on the right hand scale
4/14/2024 9:12:34 PM •
Kitchen...
•
Answered
3 days ago
•
2,198 views
Not finding what you are looking for?