20 Most Recent Peavey Pv 2600 Power Amplifier - Page 9 Questions & Answers

Call Peavey customer service. Number is on their web site.

Only one input signal per channel.

The schematic I grabbed from blueguitar.org shows several fuses in the power supplies. Did you check those, especially the one for the high voltage supply for the output tubes - fuse F1 on 'main board' ?

Mine has no designated monitor out, only two speaker output in back. You could use the preamp out/pwr amp out with headphones to monitor on front panel right side.

• Your serial is 1992
• Serial numbers correlate to shipping dates of US models only. 1978 to 1995. Imports designated by EX, EXP, or BXP are not serialized by year.
• 8Mxxxxxx ..........................//..................1978
• 0000xxxx t/m 0030xxxx ........................1978
• 0031xxxx t/m 0047xxxx ........................1979
• 0048xxxx t/m 0065xxxx ........................1980
• 0066xxxx t/m 0099xxxx ........................1981
• 0100xxxx t/m 0129xxxx ........................1982
• 0130xxxx t/m 0169xxxx ........................1983
• 0170xxxx t/m 0199xxxx ........................1984
• 0200xxxx t/m 0239xxxx ........................1985
• 0240xxxx t/m 0259xxxx ........................1986
• 0260xxxx t/m 0339xxxx ........................1987
• 0340xxxx t/m 0359xxxx ........................1988
• 0360xxxx t/m 0419xxxx ........................1989
• 04249338 t/m 0439xxxx ........................1990
• 0440xxxx t/m 0519xxxx ........................1991
• 0520xxxx t/m 0599xxxx ........................1992
• 0600xxxx t/m 0639xxxx ........................1993
• 0640xxxx t/m 0769xxxx ........................1994
• 0770xxxx >>.........................................1995

THE MODEL # WOULD HELP

We don't do that here, I think. Check with Peavey

With a screwdriver. In some, you just pull out the Bass speaker, everything else is sealed, and get at the Xover from the hole....

Speakers are front loaded onto the baffle - probably. To test the cab - go through the jack panel in rear - probably.

I don't know how your question ended up in "Computers", but I'll try to help you anyway... I found a schematic/manual for your PEAVEY, but I think it's a just partial schematic because no power supply is shown? A link is provided below... The manual mentions your "Clipping Indicator" but mentions only on IF DISTORTION is present. See page 21. That LED circuit samples audio BEFORE and AFTER your "3 band equalizer". That equalizer is only shown as a "block" with no other specifications other than "CHANNEL 19 - 20". *See page 29. In your case it appears that your CLIPPER is sensing a signal overloading condition OR that IC may be defective? And because it's only shown as a block, there may be more than one IC or many other components involved in that section? In fact the fault may be well before your CLIPPER sensing circuit! In example a bad or leaky CAPACITOR in your power supply MAY be injecting AC into your Mixer? I've just added a SECOND link below showing bad and good capacitors. It's difficult to say without a voltage chart or the IC DEVICE numbers known...A full schematic would have helped us both more... I hope this was of some help to you! Armed with this manual, your broken PEAVEY and the schematic I think a good tech should be able to sniff out the problem... Look for burnt or discolored items FIRST! Anthony https://media.americanmusical.com/ItemFiles/Manual/PeaveyXR1212MixerManual.pdf Good Bad Ugly Capacitors EMBEDONIX

hi Danny. not sure if this link will help you find out but have a look. Peavey Usa Axcelerator 5 String Bass Axcelerator Accelerator Usa Red... or you could try this one as well. original price of the Peavey Axcelerator 5 string bass Google Search

You might thy going backwards from the output to the IC .have a good light and make yourself a pointer that is nonmetallic which you can track the copper strips on the circuit board without touching them. If you remove this IC from the board, be sure to wear a grounding strap to your hand or wrist, connected to the metal chassis.BE SURE TO REMOVE THE POWER CABLE BEFORE YOU BEGIN! Note the exact way you remove it. The number one pin will have a indented dot on the plastic case. Be sure to reinstall in the correct order. ALWAYS WEAR A GROUNDING STRAP TO HANDLE ANY IC! The static electric in your body can blow certain IC units. You can make you own grounding strap using an old metal watch band, a piece of flexible wire approx. two feet long and an alligator clip to attach it to the chassis. Hope this helps you and I hope I have not confused you.

This sounds like a bad battery. If I remember right the AC is active.

Well, I would say it isn't dropping the level of "the whole pa", it is just dropping the level of the input you have plugged the fx into. Check the settings on your fx unit, there are usually input, output and mix controls that are independant of "the pa" and affect the amplitude of the signal going into your mixer from the fx unit.

http://www.peavey.com/support/searchmanuals/ Owner's manuals and spec sheets that are not available on our web site may be obtained by mail (via money order) or by phone (via credit card). Spec sheets and schematics are $2.50 per copy, and owner's manuals are $7.50 (paperback) and $20 (notebook). Send Money Order to: Peavey Electronics Parts Department PO Box 2898 Meridian, MS 39302 Credit Card orders by phone: 1-877-732-8391

Your device has amp issues that need to be addressed.

Contact Peavey customer service for the answer. peavey com

According to Peavey it was made in 1978, in the USA

Peavey can supply most all the parts for their gear and sells directly to end users. However, they now charge shipping on parts (they didn't used to) so it's best to grab more than just a single pot when you order. Corners, feet, handles, etc

I get good 8" speakers from- Richter 8 8