I have a Panasonic TH-42PZ80U tv, I bought a wall mounting bracket that is missing the screws that fit into the back of the tv. Can you tell me what size and if it is fine thread. I have tried 3/8" to big, 5/16" fine, and 1/4" to small
The screw holes are metric. The set is supplied with M5x25 screws to attach the pedestal, so the wall mount screws will be in that same range.
Posted on Mar 01, 2009
service menu code for th-42pz80u
Panasonic TH-42PZ80U Enter Service Mode InstructionsWith TV on, press and hold the volume down button on the front of the TV, and press info three times on the remote. Select Category Instructions1 and 2 Change Data Instructionsvolume up and down Exit Service Mode Instructionspower down Menu Categorywb adj Menu Itemsrgb cut rgb drive all cut all drive -->do not use these unless you need to match ywo displays side by side.
Posted on Apr 17, 2009
Panasonic Viera keeps going into picture refresh mode. How can I stop this?
The tv is on "store" rather than "home" setting. If the message "going to refresh mode" keeps appearing every 5-10 minutes, do the following:
-Unplug TV from wall and leave it for about a minute.
-Plug TV back in and follow "initial setup instructions" (can be found on page 14 of manual).
You will be given the choice of "home" or "store" settings. Change it from "store" to "home".
-Done.
Posted on Aug 20, 2009
My Panasonic won't switch to any hdmi inputs. It just keeps them grayed out, regardless of which I use (1,2, or 3) or what is connected (laptop or PS3) Any help out there?
go into the main menu and look for "input lableing" then you can activae the hdmis
Posted on Nov 17, 2009
my panasonic hdtv th-42pz80u has a red power light that blinks on and off and the tv will not turn on. how do i fix this?
How many times is that light blinking? For example a 7 blink error code would blink 7 times pause 7 times etc. What is your's blinking?
Posted on Dec 10, 2009
Want to turn off audio description off on my Panasonic Viera. Handbook says go to menu then sound but I can find nothing there.
iv got a panisonic i dont know if its the same but i click on the options buttion witch takes me to the options menu
then it says ad in the multi audio/ad box change this to eng
Posted on Jan 11, 2011
How do I retune my Panasonic Viera TV?
Hello Automatically searches and adds available channels to the memory. Select "ANT in" Select Cable or Antenna Select "Auto" Auto channel setup Start scanning the channels Available channels (analog/digital) are automatically set. All channels: Scans digital and analog channels Analog only: Scans Analog channels only If OK is not pressed after selecting "Apply", the channels will not be saved. The channel will be saved when no operation is performed for 60 seconds and the "Manual program" menu will also exit automatically. About broadcasting systems Analog (NTSC): Conventional broadcasting Digital (ATSC): New programming that allows you to view more channels
To tune your Panasonic Plasma to on air TV channels do the following:
Connect the antenna connection to its antenna in at the back panel.
Select a scanning mode
Select "Auto program"
Select "ANT in"
Select "Auto"
Select scanning mode (ALL channels/Analog only/Digital only
Digital only: Scans Digital channels only
Confirm registered channels
If you perform scanning more than twice, previously saved channels are erased.
featuring high-quality video and sound
[Use "UP ' DOWN ' RIGHT ' LEFT] AND 'OK"] keys to selcet and proceed.
Posted on Mar 07, 2011
how to fix vertical black line on panasonic viera th-42pz80
If you let me know in which location of the screen is located I can assist with the possible cause since the vertical line can be caused by different items based on where its located on the Screen such as center of screen, or far right side or midle of the right half side of the screen. Reply to this same post with where the line is located and I will assist you with it.
Posted on Oct 19, 2011
I had my HP computer connected to HMDI 3, Calbe Box to HDMI 1 and Xbox to HDMI 2, all working, then suddenly no more HDMI signal from any port only from my DVD hooked to A/V and working ok. Something happend to all my HDMI inputs.
sounds like you need to update firmware
Posted on Jul 23, 2012
my panasonic viera tv red light blinking 5 times and it wont turn on
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
Posted on Jul 28, 2014
717 questions posted
Usually answered in minutes!
346 Questions
268 Questions
236 Questions
213 Questions
189 Questions