20 Most Recent
Panasonic TH-46PZ800U Plasma TV - Page 6 Questions & Answers
How do I remove the TV stand from a Panasonic 50Px80U?
Do you mean the original pedestal base for the Panasonic TH-50PX50U? The base has two vertical posts that fit into recessed areas in the TV. Then four screws (two per post) secure the TV and base together. To remove the base, place the TV screen down on a solid surface that is covered by a clean soft cloth. Remove the black M5x25 screws and slide the base away from the TV. To store the pedestal more easily, remove the 4 silver M5x18 screws that secure the posts to the base. A Philips head screwdriver is needed. Save all of these parts in case you need to put the pedestal base back on the TV.
See page 7 of the Quick Start instructions here:
https://pdf.crutchfieldonline.com/ImageBank/v20090127124100/Manuals/133/13350PX80.PDF .
I hope this helps.
Cindy Wells
5/27/2023 2:16:53 AM •
Panasonic...
•
Answered
on May 27, 2023
Large yellow spots floating across TV screen
Adjusting the Color Temperature
Color temperature refers to how red (warm) or blue (cool) the color palette is. This control helps you to adjust the color settings on your TV. You can change the color settings by following these steps:
- Using the TV remote, select settings and look for a menu item labelled video or picture.
- Select Color Temperature. A slider should appear that allows you to slide between cool and warm colors. The colors might also be labelled red or blue.
- Slide the settings away from red/warm and towards blue/cool using the remote control. You can leave the slider at the point where the color is most pleasing to you.
5/21/2023 12:58:23 PM •
Panasonic...
•
Answered
on May 21, 2023
Panasonic SC-PM11 will not turn off
The power button could either be jammed or stuck on the TV or on the remote. Or the batteries are low in the TV's remote. Try unplugging your TV for a about 1 minute to see if that fixes the problem.
5/17/2023 6:39:39 AM •
Panasonic...
•
Answered
on May 17, 2023
Where is the reset button on a Panasonic Vero TV please?
There isn't one! They don't have Reset Buttons.
Reset Panasonic TV With Remote
- 1 ' Press Menu On Your Remote. Take your Panasonic remote control and simply click 'menu'. ...
- 2 ' Go To Setup. Select setup on the left of the TV screen.
- 3 ' Select System. ...
- 4 ' Click Factory Defaults. ...
- 5 ' Select Yes. ...
- Locate the reset button on the TV. ...
- Press the reset button. ...
- Turn the TV back on.
More items...
5/10/2023 5:02:01 AM •
Panasonic...
•
Answered
on May 10, 2023
Why my Panasonic dvd recorder input not working
If you're having trouble with your Panasonic DVD recorder input not working, you're not alone. Many people have experienced this issue and it can be a frustrating one to solve.
The first thing to do is to check the cables and connections. Make sure that all the cables are securely connected and that the power is on. If the cables are all connected properly, then you may need to reset the DVD recorder.
If the reset doesn't work, then you may need to contact Panasonic customer service. They can help you troubleshoot the issue and get your DVD recorder working again.
It's always a good idea to keep your DVD recorder up to date with the latest firmware. This can help prevent issues like this from happening in the future.
4/15/2023 10:38:47 PM •
Panasonic...
•
Answered
on Apr 15, 2023
Panasonic AV Control Receiver SA-HT05 - which code for universal remote? I have DENON RC-1005, Savio RC-02, LCD Touchscreen Universal Remote
To program a universal remote control for your Panasonic AV Control Receiver SA-HT05, you will need to know the remote control code. There are a few ways to find this code.
First, you can check the manual that came with your universal remote control. Look for a list of codes for different devices, including the Panasonic AV Control Receiver SA-HT05. Find the code that corresponds to your receiver model.
If you can't find the code in the manual, you can search online for a list of remote control codes for the Panasonic AV Control Receiver SA-HT05. There are many websites that offer this information for different models of devices.
If neither of these options works, you can try entering different codes from the list provided by your universal remote control manufacturer. Follow the instructions provided in the manual for how to enter the code, and try different codes until you find one that works.
It's important to note that not all universal remote controls are compatible with all devices. If you're unable to find a code that works with your Panasonic AV Control Receiver SA-HT05, you may need to purchase a remote control that is specifically designed for that receiver model.
3/26/2023 9:44:29 AM •
Panasonic...
•
Answered
on Mar 26, 2023
We have a Freesat Panasonic Blu Ray recorder DMR-BS750 Which will not record BBC1 since it went HD. We can record BBC2 HD and most other channels.
It's possible that your Freesat Panasonic Blu Ray recorder DMR-BS750 may not be compatible with the specific HD format used by BBC1. Here are some troubleshooting steps you can try:
Check that your Freesat Panasonic Blu Ray recorder is updated with the latest firmware. An outdated firmware can cause issues with recording.
Check if the recording schedule is set up correctly for BBC1 HD. Make sure that the start and end times are accurate and that the program is not set to record in series.
Try resetting your Freesat Panasonic Blu Ray recorder to its factory settings. This will clear any possible software errors and may help to resolve the issue.
If none of these steps work, you may need to contact Panasonic customer support for further assistance. They may be able to provide additional troubleshooting steps or recommend a firmware update or other solution.
It's also worth noting that some broadcasters may use proprietary or non-standard HD formats that are not compatible with all devices. If this is the case with BBC1 HD, it's possible that your Freesat Panasonic Blu Ray recorder may not be able to record this channel.
3/6/2023 11:12:13 PM •
Panasonic...
•
Answered
on Mar 06, 2023
How to get into service mode, Panasonic DMR-BCT750
To access the service mode on a Panasonic DMR-BCT750 Blu-ray disc recorder, follow these steps:
- Turn on the recorder and wait for the "Welcome" message to appear on the display.
- Press and hold the "OK" button on the remote control for approximately 5 seconds.
- The service menu will appear on the TV screen. Use the arrow keys on the remote control to navigate the menu.
Note: It's important to be careful when accessing the service mode as it allows access to advanced settings that can affect the operation of the device. Make sure to only make changes if you have a clear understanding of what you're doing, or seek assistance from a qualified technician if you're unsure.
3/3/2023 9:27:28 PM •
Panasonic...
•
Answered
on Mar 03, 2023
Rosen piranha multimedia navigation head unit disk try isn't reading a CD for the DVD player
If your Rosen Piranha multimedia navigation head unit is not reading CDs and the DVD player is not working properly, there are a few things you can try:
- Check the disc: Make sure the disc you are trying to play is clean and free from scratches or other damage. If the disc is dirty, clean it gently with a soft cloth.
- Check the format: Make sure that the disc you are trying to play is compatible with the DVD player. The DVD player may not be able to read certain formats, such as Blu-ray discs.
- Check the connection: Make sure that the cables connecting the DVD player to the head unit are properly connected and not damaged. Try disconnecting and reconnecting the cables to see if that resolves the issue.
- Check for firmware updates: Check the manufacturer's website to see if there are any firmware updates available for your Rosen Piranha head unit. Updating the firmware may resolve any software-related issues that are causing the DVD player to malfunction.
- Reset the head unit: Try resetting the head unit to its factory settings. This may resolve any software-related issues that are causing the DVD player to malfunction.
If none of these steps resolve the issue, it's possible that there is a problem with the DVD player itself. In that case, you may need to have it serviced or replaced by a qualified technician.
3/3/2023 3:58:10 AM •
Panasonic...
•
Answered
on Mar 03, 2023
Panasonic DVD RV62 displays message 'Bye' and does not respond
The message 'Bye' typically appears on Panasonic DVD players when the power is turned off. If your DVD player is displaying this message and is not responding to any commands, it could indicate a power issue or a problem with the player's firmware.
To troubleshoot, try unplugging the player from the power source and plugging it back in after a few minutes to see if it resets. If this does not work, try pressing and holding the power button on the player for several seconds to see if it turns on.
If these steps do not work, it may be necessary to take the player to a technician or contact Panasonic customer support for further assistance.
2/28/2023 5:55:03 AM •
Panasonic...
•
Answered
on Feb 28, 2023
Not finding what you are looking for?