Top 20 Toshiba DR410 DVD Recorder Questions & Answers

Try a new / different disk recognized by this recorder. Make sure you're using DVD+RW disks. Others will not be recognized. Toshiba R410 Specs CNET

0274,0277,0271. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/

Did you try plugging it into a different socket before concluding it is dead?

get a new one amd instage it and tell the manger that it is not working

if you can remove the cover of your dvd recorder, then access the power supply board first check if their is bulging capacitor or transformer which emits the noise.if ok, observe if the noise is coming from the dvd burner during recording.

You may have a timing gear issue, broken loading belt, or stripped gears.

I believe you only need to format DVD RW disks. These are re-writeable and need to be pre-formatted before use. "R" disks can be extended with additional material before finalization, but existing material can't be written over. They are not formatted before use.

try different type of blank dvd according to your dvd recorder format. hope this info help you resolve your problem.

the dvd recorder isnt a HD recorder so nothing you can do will allow it to record it in HD, you could improve the quality though if you try using DVD+R DL discs instead, that will double the available space for recording so it should improve quality somewhat

Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__bg78u

You can get the manual on the link below.

http://www.tacp.toshiba.com/tacpassets-images/models/d-r410/docs/d-r410_om_e.pdf

Good Luck

Press Setup on the remote > General Settings (the first option down) > Display (the second option in this list) > OSD Language *the first line) and choose your language (English should be the first in the list). Use the up/down arrows to change lines followed by Enter to select the option.

If you are using a universal remote that doesn't have the setup button that works, you need a different remote. Remotes.com has a new remote almost identical to the one that came with the unit as well as used remotes. http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=12832146296260&smodel=DR410&brand_pn=TOSHIBA_DR410 .

I hope this helps.

Cindy Wells

Hi, well when this happens usually it is the PSU in the unit that has faulted, perhaps you should take it to a good reputable Toshiba repair center and ask for a "Quote" before proceeding with any repairs.
Now to get your disc out, if you look at the front of the DVD cover, you should see a small hole, using say a paper clip straightened out, insert into this hole and push it in, keep pushing until you feel/hear a click, now keep on pushing gently in, and the draw should pop open, now you can remove your DVD.

1. Please reset the unit by unplugging it from the wall for 2-3 minutes.
2. If problems persist please email Toshiba Customer Solutions Department at [email protected].

Please include the following information in your email.
Name
Phone Number
Full Address
Model Number
Serial Number
Date of Purchase
Issue with unit

on the remote is there quick navi button (this will take u to the finalizing screen)

You can download the manual on the link below under resources.

http://www.tacp.toshiba.com/dvd/product.asp?model=d-r410

Good Luck and please rate

go to your setup menu and shut all timers off...(are you trying to record HBO...this will occur when trying to record any of HBO/Disney) check your manual and make sure you have the right type of disk...+/- makes a big difference

do you have dvd in jacks on your rca...direct tv out to dvd in.....(this setup u need to scan for channels on the dvd)..note some premium channels will not record on dvd (will and still record on vhs)

Hi
Does your dishnet box have two tuners or one, if only one then only the program being watch on the tv can be recordered , this will have to be connected to the av input on the recorder and one of the av (line input) selected with the remote control for the recorder, If the dishnet box as two tuners then the output from one tuner can be used to feed the tv and the other one will go to the recorder connected through the av input. hope this will help regards windyhouse

I have found the code for the Toshiba D-R410 DVD recorder ! The code that works with my Radio Shack family 5 in 1 remote is:
1008
I hope this helps !