20 Most Recent Sharp XR-10S DLP Projector - Page 6 Questions & Answers

Videos here for H5 Error. https://www.google.com/search?q=sharp+AR+6020+photocopier+H5+error ..

Probably drum damage or too much toner.

Check the toner levels.

Sharp make hundreds of 'machines'. If it is a calculator, the switch under the button needs cleaning. If it is a Point of Sale till, they need programming. 'make model (what it is)' in all questions please.

Probably the lamp light is flashing because either the lamp has failed or there is a fan issue. We spell some words from the French way; Metre (measurement of length) but colour will always be colour. The thirteenth element in the periodic table is not spelled aluminum, it is Al or Aluminium! That's got me started now!!!

Error Codes > Sharp > MX2300N > Code E7-03 (printcopy.info) This is a complete rundown of the error and the solution

https://www.fixya.com/support/t26730353-sharp_ar5620sl_code_l4

This link should have the Mac OS Driver https://business.sharpusa.com/product-downloads

Hey Barry, check out these links.. some may be near you.. xv z10000 sharp projector repair Google Search

sharp elsi mate el 386r ... Sharp EL-2196BL 12 Digit Printing Calculator ... Sign Change, Auto Power Off - 8 Digits - LCD - Battery/Solar Powered

check with sharp or do an online search

hi find link for how to reset el1801p https://www.google.com/search?q=How+to+reset+sharp+el1801p&sxsrf=AOaemvIS9k4EugP-KF0FR-pN-p_OshAu0g%3A1641226267914&ei=GyDTYcmgN-WsmAXx5rjoBA&ved=0ahUKEwiJmsel_JX1AhVlFqYKHXEzDk0Q4dUDCA4&uact=5&oq=How+to+reset+sharp+el1801p&gs_lcp=Cgdnd3Mtd2l6EAM6BwgAEEcQsAM6BAghEApKBAhBGABKBAhGGABQ_wlY80tgy1FoAXACeACAAZgBiAGBDZIBBDAuMTKYAQCgAQHIAQLAAQE&sclient=gws-wiz#kpvalbx=_gyDTYcyGC8-JmAXCgKWYAQ44

Purportedly, H4 refers to heat lamp problems, either broken heat lamp or dirty thermostat on the heater roller assembly. It may be referred to as the fuser temperature error. It may also be a false reading and just need clearing. If it is simply toner caked on the temperature sensor, such has to be scraped off. If a false reading, you can try to clear it with the following. Press P-interrupt-C-interrupt and enter test command 14 and Execute to clear your error. Or try Press this sequence: CLR-Exposure-CLR-Exposure; The display will go blank; enter "14", press "PRNT"; Press "CLR" several times to exit. Also, you can try turning off the machine for 30 seconds and then turning it back on to see if it clears the problem. If none of this works, it may be a bad thermistor (a resistor) on the temperature sensor.

Press the following buttons fast: #, interrupt, C, interrupt, C, 14, Start button.

hi If you lift up the panel and look underneath there are two black plastic "levers" one to the right and one to the bottom of the black roller. The larger one on the right was stuck. When I pushed on it and it popped up the "document jammed" message disappeared.

This could be fixed by cleaning the glass lens on top of the copier, which would make sure that your paper comes in contact with only one spot of light as you press your keys. This way, there will be no distortion from multiple spots hitting the same place on your paper. The printer also needs to be set up correctly before you can use it again, so check out this guide for more information.

Page 56 of the following refers to entering the Systems Settings. From there, one enters the Security Settings. That is where changes to the password may be performed. My guess is that the default password is admin. https://business.sharpusa.com/portals/0/downloads/Manuals/MX_3050_3550_4050N_Quick_Start_Guide.pdf Chances are you must be logged in as administrator, see page 58. That said, perhaps to following will be of value: When changing the password, be sure to remember the new password. (It is recommended that you periodically change the administrator password.) Enter a password consisting of 5 to 32 characters, and tap the [Store] key. Your setting is made valid only when the machine is turned On again. • The user-level authentication password is required to add, edit or delete the destination. When you log on, enter "users" as the user name. Then, enter the user password that you have registered with this option. The administrator-level authentication password is required to select all settings and the same functions as those available with the user-level password. When you log on, enter "admin" as the user name. Then, enter the administrator password that you have registered with this option. • If you tap the [Store] key without entering a password, the previously set value is assumed. Password protection is enabled by default http://www.sharpusa.com/support.aspx

HI find video link how to replace lamp https://www.youtube.com/watch?v=lM6r66luODc

hi find link for error code H2-06 https://www.youtube.com/watch?v=M6QtVDYFmlo

P mean page printer not recognised paper source please select paper setting & source from your computer printing option casset or by pass tray