20 Most Recent Yamaha RX-V463 Receiver - Page 2 Questions & Answers

First check the yam does play other sources of sound, e.g. radio or CD. Then try your ipod in another dock to check the Ipod is working. Then check the manual for the Yam to be sure that you have set it to a mode where it will take in the signal from the IPod. Did you switch it away from IPod source to play a DVD or a CD or the radio?

The problem can be the cable or speakers or RX-V463 or settings. Need to check one by one. Set the RX-V on DTS or Dolby Digital 1) Check Cables - connect the 2 (surround) cables from RXV's Centre Out to Centre speaker. If the Centre speaker works, then cables are ok. 2) Check speakers - Connect each Surround speaker to RXV's Centre out. If it works Speakers are ok. 3) Check RXV - Set it on DTS or Dolby Digital Connect RXV's surround out (one at a time) L and R to the Centre speaker. If there is no sound, the problem could be RXV's settings (I need to read the manual). Hope this helps.

Hi,possibly the laser is faulty in the unit.You need to send it to your repair agent for assessment.

Check the cabling and if all are fine go to speaker self test noise using remote to confirm your setup is fine. Thn finally check ur soundd feed format. Check which channels are nt working. Sound is always based on Content source.

seems like you have the jacks in the wrong place, try moving them around.

Are your speakers turn on? Look on the front panel and make sure it shows speakers A on the display. It is very easy to accidentally turn them off with the speakers front panel button.

maybe the audio amplifier IC's have problems that's why the device protects himself from a bigger damage

Power it On without speakers connected.If it powers up, reconnect speakers one at a time to find the cause.If the problem persist even without speakers connected, these unit needs servicing.if you have any more questions let us know.