Thomson M140 Microphone - Answered Questions & Fixed issues

the same thing is happening to me ?

Using a microphone with computer

To use any microphone with your computer you will need to enable it in control panel. The following instructions are for Windows XP but are broadly similar for Vista and Win7

Click START, CONTROL PANEL, SOUNDS & AUDIO DEVICES

Click VOICE

In Sounds & Audio Devices Properties window locate SOUND PLAYBACK box. Click the VOLUME button. Make sure that there is not a check-mark in the MUTE box against microphone in the list of devices and that the volume slider is at the top of the scale.

Make sure the MUTE ALL box isn't checked before closing the window.

Now click the VOLUME button in the SOUND RECORDING BOX. Here SELECT microphone as an input source for recording (as opposed to un-checking mute in the playback controls).

NOTE if your microphone is not listed in the 2 sets of volume controls click OPTIONS, PROPERTIES on the tool-bar and place a check against microphone in the list entitled 'show the following volume controls' and then click OK. Same applies for Internal mic.

That should be it.

To adjust audio volume generally.

Under VOLUME tab adjust Device Volume as necessary. Also (under Loudpeaker Settings) click Speaker Volume and adjust slider to suit.

You might put a check mark in the box to show the volume control on the Task Bar so you can go straight to it to make adjustments in the future.

Check that you have power at the outlet, (by plugging something else in), and check that nothing has chewed the supply lead. After that I would say that the power supply inside the unit has died. Pull it apart and check the voltage(s) with a multimeter but, only if you have some electrical know how and equipment.

I could not find manual for your device. You can find the manual of similar device from THOMSON Mp3 Player User Manuals Download ' ManualsLib A solution is already available on fixya SOLVED: Thomson lyra 6675 Flash Mp3 Player 2GB - Fixya

There is no way. The alarm is electronic. The only thing you might try is spraying the alarm buttons with electrical contact cleaner.You could contact them and see if they would repair it.https://images-na.ssl-images-amazon.com/images/G/01/00/00/05/00/21/30/500213070.pdf..

Hello Jan, tell us what model is your portable CD player Thomson I wait your answer Greetings Franco Dosil Hola Jan, comenta que modelo es tu portable CD player Thomson Espero tu respuesta Saludos Franco Dosil

Murdo's tip to trim off the cover of the AA battery base to expose a few mm of metal is spot on. Replacement rechargeable batteries for my Thomson wireless headphones did not charge, no green light, utterly frustrating, till I read Murdho's suggestion. Thanks for that

A "Remote code" for what "device" to talk to your thomson x101b??

http://www.thomsonaudiovideo.eu/ It might be a french product . Not sure if you need to speak french but you could ask them if there is a user manual ? Maybe use a translator web site and put french in as well in your request .

No other way other except to boost the sound level out of the device you are listening to..

When you connect it to the computer is it showing as a portable drive? IF so you should be able to browse it and delete them that way, or you could format it .

hi.... you have the solution for your problem? i have the same problem and i cant find the answer...can you help me? my e-mail: [email protected]

If you have a remote version here is how it works. Press timer menu, hours should flash, then press up an down arrows until you get to clock set. Press enter on remote. press up an down arrows to set hours, then press enter. Minutes now flash, press up an down to set, press enter on remote clock starts.

Most of these set top boxes use encryption for the recorded material. This has to do with copyright protections, a lot of legal stuff, and etc. Get another box of the same model, and activate it on the same account. Try swapping out the hard drive or SSD module to the new box. In many cases this works. Some of the newer high end boxes are now using SSD technology to hold the recorded files. If your box is with a cable or satellite service provider which is should be, some of these providers provide a service to transfer the files from the old defective box to the new one as long as the hard drive, or SSD module is okay.

Hello Joan, To record a satellite you will need two scart leads. Plug one end of the first scart lead into the "DVD/VCR SCART" socket on the back of the satellite receiver, then plug the other end into the "INPUT" scart on the back of the VCR. Take one end of the second scart lead and plug it into the "OUTPUT" socket on the back of the VCR and plug the other end into "SCART IN" socket on the back of the TV. To record, select the satellite channel you want to record, then, on the VCR, select scart input, (at this point, you can record a satellite program). To watch a satellite channel or recorded satellite channel, select the scart input on the TV. If you need anymore information, then let me know. Kind regards, Ron.

is it the dvd disc? try changing around the disc

Its broken. The electronics supplying the picture have failed. The rest of seems to be working. It would cost more to repair than to replace, buy a used one on ebay. Better still buy an old used Creative MP3 player, (not a new one) my creative ZEN runs with a 128gb SD card in it, and sounds great.

Have U tried the website for user manuals for your gadget?

My Thomson 6728 keeps showing ! Profiling requires 20MB free space Shutting Down

u pay for what u get, change ur plan for the internet if u have the money for it.