20 Most Recent Samsung SGH-G800 Cellular Phone - Page 4 Questions & Answers

You have to replace the LCD by buying it online (Difficulty is high)

Otherwise you can simply take the phone to a cellphone repair person in your are.

please write your problem in English so that we may help you. Thank you

The IMEI number is unique the each mobile phone.
The number is printed on the label under the battery.
You can also get the IMEI number by entering this on your phone
*#06# It will then display your IMEI number and you may also get a unique global serial number. Your IMEI number should be 15 digits.

hi,itneet to reflash or upgrade.go to samsungsite & let it to upgrade your phone with a new version of firmware.

good luck & remember to ratethis solution !

Hello and Welcome to FixYa!
You can download the PC Suite, which will install the drivers itself and will allow you to sync your data, arrange add/remove and can do other data handling as well. I've attached the download link below, kindly do note that this will be compatible with all the windows except Windows 7 as an update is not yet released.

If you think I was of help, your token of appreciation in the form of rating will be esteemed.
Concerned, Nooh

P.S: G800 PC Suite

the unlock code that u have entred didnt match n has corupted ur phones software .u need to visit any nearby Samsung authorised service centre and ask the to upgrade ur phones software and once its done ur phone will function as before

You might need an network unlocking to be done.

NETWORK UNLOCK CODE:

You can unlock it by flashing your mobile if your mobile is a CDMA mobile...
The procedure for flashing your mobile is in the link below
http://hubpages.com/hub/How-to-Flash-your-cell-phone
It has an video explanation.

If your mobile is not an CDMA mobile , you can get the network unlock code(NUC) by just contacting the current network provider customer caredepartment.It is free of cost.

Therestrictioncodecan be got from your old service provider..This restriction code iskeptto prevent someone who stole themobile from using it withanotherprovider...

They will have a security check done with your date of birth etc..to verify whether you are the exact owner of the phone..

After that they will provide you the restriction code to unlock it and use it with another service provider..

It is all free of cost donot pay anyone for this seeing some advertisement over internet . That is all fake ads.

The above proceudre works and you can verify that by seeing the rating of an happy customer here..
http://www.fixya.com/support/t4035818-need_unlock_nokia5130c_2_use

Hello,

To replace the screen of the samsung g800, get there appropriate screwdriver and follow the process below;

1. Remove your back cover, battery, sim and memory card. Remove the six screws (two at the bottom are covered by rubber stoppers which are easily removed). You can now remove the battery compartment.
2. Below you can see the battery cover removed. You now need to disconnect the circled ribbon connector. It attaches like a plug and socket. Simply lift the connector up to unplug it.
3. Lift the circuit board up to reveal another connector. It attaches like the last one. Unplug this
4. You can now remove the circuit board. Note that the ribbon running along the right of the circuit board, with the volume buttons at the end, is lightly stuck down with a tacky glue or double sided tape.
5. Remove the grey part. Note that the ribbon with the camera button at the end is stuck down lightly. Next remove the four screws.
6. Part of the slider can now be removed.
   
7. Next remove the two rubber stoppers at the top of the phone to reveal two more screws. Remove the four screws.
8. Remove the ribbon which is stuck to the black rectangle. It'll just peel back.
9. Run your plastic tool all the way around the join of the front cover to unclip it.
10. Lift the screen away from the phone at the point on the opposite side. The screen is stuck down lightly with double sided tape.
11. You should now have the LCD removed.
12. Turn the LCD screen over and remove all the green tape you see. You now need to detach a number or ribbons. The ribbon attaches like a plug and socket. All the other ribbons have a hinge which you need to flick up to release.
13. Reverse the whole procedure for reassembly.

Take care

virus................................

try the last 4 of your phone number

You dont have to have a sim card in the phone in order to turn it on. It should turn on and usually it says the name of the carrier when the phone turns on

You display flex cable (the cable/wire which connects the display and printed circuit board/pcb) has been damaged, this happens usually with slide phone. You can get a replacement from the market. Good luck. Thanks for using FixYa.

• Power on without SIM
• Type in #7465625*638*Unlock code# (8 digit unlock code*)
• Device should say: “Network Lock Deactivated”
• Phone may automatically reboot
• *The 8 digit code can be obtained by calling the Mobile Operator Customer Care Department and given the representative the IMEI number. In exchange they will give you the Subsidy Unlock Code. Alternatively, you can go online and seek out a Subsidy Unlock site.
  To obtain the IMEI number press *#06# on your mobile device.

Step 1:Power on without SIM Step 2:Type in #7465625*638*Unlock code# (8 digit unlock code*)
Step 3:Device should say: “Network Lock Deactivated”
Step 4:Phone may automatically reboot

No. The U600 uses a different cable to the G800.

oooooooo 8 zeros

possibly liquid damaged open it and check

On link below on page 7 tells you how to turn the phone on.

http://downloadcenter.samsung.com/content/UM/200711/20071105162103781_SGH-G800_UG_EU_Eng_Final_071016.pdf