20 Most Recent Ariston Technologies Ariston AWD12 Front Load Washer/Dryer - Page 3 Questions & Answers

your bearrings may be seized up

Possible that the inlet valve is not controlled or faulty . check the voltage and see if the voltage is cut after the level is achieved. If not the water level sensor is defective.If the inlet is not controlled then the program controller is a suspect.

Hi there:You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time. Hopefully one of other experts will be able to provide you with a real solution. Thank you for using FixYa.

Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

take the power draw out and clean then clean the inside top with a old tooth brush it gets clogged with lime in the water jets

I have an old Margherita washing machine year 2000, my problem I don't have user's manual. Can you please provide me or teach me how to operate the machine?

Thanks & regards

ray salac

Hi

You can buy the parts at this link. Hope this helps...please post back for further assistance.

Daniel