20 Most Recent Tilia FoodSaver V2240 - Page 2 Questions & Answers

The problem must be simple. Bad cord? Bad switch at the hinge? It can be dismantled and tested for continuity with a multimeter.

This is typically a bad seal and the vacuum cant build enough pressure. You can usually dampen the black rubber seal with a sponge and water before you use the machine. this solves the problem most of the time

My game saver would not go throught the cycle .It would take the air out to sometimes the secound light.I changed the gaskets no help.Last night I took it a part and found one of the plastic parts that the hose went on to was cracked.I put some apoxy on it and we are now up to five lights again. Joe

I am having the same problem, it is like the heating element for the sealer is broken.My unit actually will NOT seal if I push the manual seal, but the vacuum works.

Put food in bag. Open lid using latch to right if necessary to release. Put bag in sealer. Close lid. Close latch. Push vaxuum or seal to activate