20 Most Recent True Freezer T49DTG Stainless Steel - Page 3 Questions & Answers

There is an overheat klixon on the evaporator that stops the fan running until the coil gets below -11c This can take some time after startup. if the freezer runs more than an hour before the fan starting, check the klixon isn't faulty, and you have power to the fan. Also check the condenser grille is nice and clean as it will slow down the freezing process.

T-stat issue is most probubal. Or check the condenser and clean it if needed. Or if comp runs then stops then runs then stops and or very hot, your comp is shot and needs to be replaced,

Defrost the ice

Give the evaporator a chance to get cold, then check you've got power to the fan, via the evaporator thermistor and door switch

it has technical problem you should read the catalogue.

you are right but you should read the catalogue.

The light should have a cover over it. If not, then just try to loosen it if you can by pressing in on the bulb while turning it. This will help keep it secure to the base of the bulb. If you get it replaced it should work. If it doesn't, then check the button or 1/4 shape tab and see if it is loose or jammed. It stays in a somewhat wet environment all the time.

what is your model number is then we can get started then

There is a safety cutout on the evaporator that sometimes goes open circuit, stopping the heater coming on in defrost.If the compressor will not turn off, check the condenser is clean.and the fan working. next check the thermostat hasn't broken. Lastly, check the defrost timer.

yes

This can be due to poor mounting of teh compressor. If the freezer is old then the mounting bushes can be worn out and must be replaced. Also check on the mounting bolts as if these are loosely fitted the compressor will ******** moe specially when the motor stops due to the force.

I THINK YOU WILL FIND IT IN A BAG IN THE BACK OF THE FRIDGE, LOOK BY THE COMPRESSOR. LOOK REAL GOOD FRONT AND BACK . ITS FOLDED UP INTO A SMALL BAG

You have to contact True and they will send it. They do not have this on their web site. Just user manuals. 1-636-240-2400