20 Most Recent Evenflo Aura Elite Travel System - Page 3 Questions & Answers

there should be a strap in the middle of the bottom/bed portion that you can push down or pull up on.

I have an Evenflo stroller and if it is like mine the handle where you would push the stroller at should have a red area with a yellow button it the center of it. Place your hand on the button and squeeze up on the yellow part then back towards you on the red part. Sorry if I didn't explain very well hopefully you get the idea and it works! Also as you press these buttons kind of pop it up then I use my foot on the bar between the rear wheels to hold it down while clicking it into place. This button also folds the stroller back down. Good luck!

Very simple. On the bottom of the car seat adjust the harness anchors on each side of the car seat and slide those through the slots that you need adjusted. I have the user manual if you need it. Email me at [email protected] with your email address and I will send it to you.

Hello

Here is a website you can take a look at. The evenflo site shows any recalls as well. http://safety.evenflo.com/cs/sc/cssc_RD.phtml I hope this help you out. Please let me know.

Thank you

Hello,

I would think it would be best for you to call the customer support number so they can walk you through step by step. US: 1-800-233-5921
Canada: 1-937-773-3971

Good Luck!

Hi,That link has the instructions for your evenflo crib.Make sure you have Adobe Acrobat Reader to view it cause that's what it opens the instructions with.This will help. https://plweb.evenflo.com/product_search…

Thanks for using fixya and have a nice day

Don't! The seat was manufactured with the 5-point harness, and it was designed to be used only that way. Don't risk your child's life.

Evenflo has a GREAT website section on using and installing their carseats. The manufacturer is the final authority on keeping your child safe in their seat: don't accept advice from anyone else!
http://www.evenflo.com/sme_carseats.aspx?id=321

You also ought to have your instruction manual for reference: order it for free, at this link:
https://plweb.evenflo.com/replacement_parts.aspx

Match the red arrow on the fabric seat to the middle of the seat back. Use a crochet hook to fish the elastic straps through the slots. Pull the elastic straps to hook on to the tabs on the lower rotator fastener. The key is to pop the fabric seat up into a cone, so that you can see what you're doing.

i plug in the model # in at www.parents.com
in the recall finder...and it came up no results.

http://www.parents.com/product-recalls/search/?recallCategory=2&timePeriod=0&searchString=0151614&_requestid=185218

I went to evenflo site and got the pdf manual for the car seat. thanks

we were given a evenflo baby suite and need to know how to break it back down so that it will fit back in its travel bag

You can call Products America at 800-205-9642 or 800-772-1041. We offer a wide verity of hardware for many cribs.

You can call Products America at 800-205-9642 or 800-772-1041. We offer a wide verity of hardware and instructions for many cribs.

Hi.

Hard to know wich stroller you have.

But what you can do is visit www.evenflo.com

Top right side of the page you can get intructional videos under SUPPORT..
Or you can go to the bottom and use the CONTACT US fieldt to get additional help if the video don't solve it.


Good luck! :)

Cathy

Take the stroller to a LOCAL hardware store where someone can help you find a "pushnut". This may be the part missing that holds the wheels to the axle. They come in different sizes, so you need to bring stroller.

I own one also. I think the button gives out over time but don't worry it still folds. Look at the front of the stroller like your putting a kid in you will notice two handles one on each side, there are buttons on both and they jam sometimes, push the buttons in an pick up at the same time and it will fold.

have a look here. you will likely find what you need to figure that out

http://safety.evenflo.com/cs/sc/cssc_RD.phtml

I found your fee for 1 solution to be too high. I emailed the evenflo company and they helped me solve the problem.
Thanx for checking.

http://babycare.manualsonline.com/manuals/mfg/evenflo/evenflo_stroller_product_list.html