20 Most Recent Timex Expedition E Tide Temp Compass wristwatch - Page 9 Questions & Answers

hi Janet. You may also need to change the time when traveling or to adjust for daylight saving time.

1. What to Look For. Locate the MODE button, the SET/INDIGLO button and the START/STOP button on the side of your Timex Indiglo WR 30M.
2. Setting the Hours. Press down the MODE button until "TIME" appears. ...
3. Setting Minutes and Date

https://oureverydaylife.com/how-do-i-change-the-time-on-a-timex-indiglo-wr-30m-12421830.html How to set the time on timex WR30M watch Google Search

try this link below https://www.timex.co.uk/watch-manuals.html

try the link below http://assets.timex.com/user_guides/W207_M115/W207_M115_NA_EN.pdf

Ask utube

I don't know about this specific watch and what happened but so see it as a pointer to rule out a mishap....What happens a lot is that while removing and reseating the back of the watch, some contacts that use the back to ground (it is part of the internal circuitry) will not make contact after re-installing. This can be due to bended contact points or a placed plastic mask with holes in it. After installing the holes do not sync up anymore with the contact points so... no contact. Just remove the back and take a good look. What you can do is cleaning the inside of the backplate with alcohol and/or contactspray (remove the excessive fluid, it should not be soaked). Contacts that stick out maybe bend just a little more outwards to ensure good contacts. Are there any contact-blades missing. Sometimes springs are used to make contact. These can easily jump awar when you remove the back. Good luck!

Oh man--go to utube

Is it a quartz, a manual wind or an automatic?