Top 20
Nautica A40008 Watch for Men - Page 4 Questions & Answers
Time not set properly in my watch lasika w-f62
To set the time on your Lasika W-F62 watch, please follow these steps:
- Press the mode button on your watch until you reach the time-setting mode.
- Press and hold the "Set" button until the hour digits flash.
- Use the "Adjust" button to set the correct hour.
- Press the "Set" button again to move to the minute digits, which will also be flashing.
- Use the "Adjust" button to set the correct minute.
- Press the "Set" button again to confirm the time and exit the setting mode.
If you have any trouble setting the time on your watch or if it doesn't seem to be working properly, please consult the instruction manual that came with your watch or contact the manufacturer for further assistance.
2/19/2023 11:19:08 AM •
Watches
•
235 views • 0 helpful votes
My watch not working how to setup
- Check the battery: Before attempting to set up your watch, make sure that the battery has not run down. If the battery is dead, you will need to have it replaced by a professional watchmaker or authorized Breitling service center.
- Wind the watch: If the battery is not dead, you may need to wind the watch to get it started. Most Breitling watches have a self-winding mechanism, but if it has not been worn for a long time, it may need to be manually wound.
- Set the time: Once the watch is running, you can set the time by pulling out the crown (the knob on the side of the watch) and turning it until the hands are set to the correct time. Push the crown back in when the time is set.
- Set the date: If your watch has a date function, you can set the date by pulling the crown out to the second position and turning it until the date changes. Push the crown back in when the date is set.
- Synchronize the time: If your watch has a chronograph function (stopwatch), you may need to synchronize the time to ensure that it is accurate. You can do this by starting the chronograph and waiting for it to complete a full revolution.
2/12/2023 1:19:09 AM •
Watches
•
199 views • 0 helpful votes
My dango watch second hand stops some time
If your Dango watch's second hand stops intermittently, there are a few things that could be causing the issue. Here are some possible reasons and solutions:
1. Low Battery: If the battery in your watch is running low, it could cause the second hand to stop. You may need to replace the battery in your watch. Check your watch's manual or take it to a watch repair shop to have the battery replaced.
2. Dirt or Debris: Dirt or debris can get inside your watch and cause the gears to stop moving properly. If this is the case, you may need to have your watch cleaned and serviced by a professional watch repair person.
3. Loose Second Hand: If the second hand on your watch is loose, it could cause it to stop intermittently. A loose second hand can be caused by a damaged pinion or cannon pinion. You may need to take your watch to a professional watch repair person to have it fixed.
4. Magnetic Interference: Magnetic fields can interfere with the movement of the gears inside a watch, causing it to stop or run erratically. If you have been around strong magnets or electronic devices, it could be causing the issue. Try moving your watch away from these devices to see if that helps.
5. Mechanical Issue: There may be a mechanical issue with your watch's movement that is causing the second hand to stop. This can be caused by a worn out gear or other component. You may need to take your watch to a professional watch repair person to have it fixed.
3/14/2023 2:24:23 AM •
Watches
•
65 views • 0 helpful votes
How to change to show right day of week
Impossible to answer. On WHAT!!!
All questions need FULL 'make model (what it is)'.
Google
make model manual
Normally on that type of device you have to set the YEAR, and then the MONTH like on my Weather Station Indoor Unit..
..
3/19/2023 5:15:34 PM •
Watches
•
53 views • 0 helpful votes
How much is a base metal bezel 2018 fmdxge012if184 worth
It's difficult to give an accurate estimate of the value of a specific item without more information and context, such as the condition of the item and any additional features it may have. However, in general, a base metal bezel for a 2018 FMDXGE012IF184 watch is likely to be worth less than one made of precious metal like gold or platinum.
The value of a base metal bezel watch can vary greatly depending on the brand, model, and condition. It could be worth anywhere from a few dollars to a few hundred dollars. It's best to consult with a jeweler or a watch expert to get a more accurate estimate of the value of your specific watch.
Additionally, you can also check on online marketplaces such as eBay or Amazon to get a sense of the price range of similar watches that are being sold.
1/15/2023 6:49:54 AM •
Watches
•
78 views • 0 helpful votes
Can't set time on my Ott light - when I push S button, it does not flash
It sounds like you are having an issue with setting the time on your Ott light. Here are a few suggestions that may help you resolve the problem:
- Check the owner's manual for your Ott light. It should have instructions on how to set the time and troubleshooting tips for common issues.
- Make sure that the light is plugged in and the power is turned on. If the light is not receiving power, the time cannot be set.
- Check the batteries in the remote control. If the batteries are low or dead, the remote may not be able to communicate with the light and the time cannot be set.
- Make sure that you are pressing the correct button on the remote to set the time. Some Ott lights may use a different button or sequence of buttons to set the time.
- If the light is still not responding to the remote control, try resetting the light by unplugging it and then plugging it back in. This may reset the light and allow you to set the time.
If you have tried these steps and are still having trouble setting the time on your Ott light, you may need to contact the manufacturer or a customer service representative for further assistance. They may be able to provide additional troubleshooting tips or repair the light if it is experiencing a hardware issue.
12/26/2022 3:46:17 AM •
Watches
•
85 views • 0 helpful votes
Change battery on aqualite 30M watch
Hi,
please view the back of the watch and look for screw or plastic latch that you can use to open the back and access your watches battery. You can search amazon or bestbuy for a replacement battery and then order it. But if you find it hard to open the back of the watch, you can visit a local watch store to help you with that and they might have a replacement battery for you as well.
Thank you.
12/10/2022 11:56:12 PM •
Watches
•
123 views • 1 helpful votes
Not finding what you are looking for?