Kingston DataTraveler 101 G2 - Page 9 - Answered Questions & Fixed issues


Have you tried GOOGLing that model and checking the info ?

Electronics -... | Answered on Dec 28, 2017 | 233 views


What model do you have?

Electronics -... | Answered on Dec 24, 2017 | 118 views


Refer your inquiry directly to Digitor.

Electronics -... | Answered on Dec 17, 2017 | 272 views


Download and install Partition Wizard on your computer.
Put the USB in, and open up Partition Wizard. Click on the 1GB drive, now on the left side click format. On the top left click Apply and wait. once done your USB is formatted and open. Hope this helps.

Electronics -... | Answered on Dec 15, 2017 | 332 views


horn check it works as they can go, relay is probably gone for the indicators. its usually a green relay, but if its original it could be any color. they not on the same wiring as each other.

Electronics -... | Answered on Dec 13, 2017 | 119 views


sorry but we do not have that information here but mp3 players are not made to be encrypted. YOU MESSED UP

Electronics -... | Answered on Dec 07, 2017 | 195 views


There is no problem, the input current is over the necessity of the power bank and will charge the phone.

Electronics -... | Answered on Nov 25, 2017 | 165 views


yes, but a slightly depleted battery will take longer to reach full charge if the current is being drawn from it.... although if it's an LED light and efficient radio the current draw will be almost negligible or hardly enough to notice.

but why would you want to run mains electrical items from a battery that's plugged into the mains?
it's much more efficient to use mains electrical power for your devices until there's a power outage (this is where the inverter is really needed) or you need mains power in the middle of nowhere.

if you absolutely want to go down this route maybe an old UPS would come in handy, it will continue to output mains power in the event of a power outage.... just connect your battery in place of the old dead one (your 32Ah won't fit in the box, just use heavy cable) UPS boxes hold a 12v battery, it's a simple hack.

Electronics -... | Answered on Nov 23, 2017 | 93 views


What type of TV, IE: Make and Model. If you have a SCART socket, then you can probably use the audio output connections on the SCART cable to connect to your stereo.

One thing to check is that your TV isn't muted! I know it sounds silly, but lots of people have inadvertently muted their TV's and not realized it.

Electronics -... | Answered on Nov 18, 2017 | 82 views


hi there.
see if this link helps you out.
computer is not reading memory stick Google Search

Electronics -... | Answered on Nov 18, 2017 | 261 views


hi thembi.
Go to My Computer and under Devices with Removable Storage look for your cardreader; right-click on it and click Properties. In the pop-up box, sometimes there's an option to Remove write-protection. Change the status of this option and try again. Remove your memory stick from the drive.

How to Format A Write-protected SD Card/USB Drive/Pen Drive ...

or go to this link and have a read up.
memory stick is showing write protected Google Search

Electronics -... | Answered on Nov 21, 2017 | 197 views


Get me on Skype we discuss what the issue could be. My Skype Id is eddyedu9

Electronics -... | Answered on Nov 13, 2017 | 771 views


  1. Connect your set-top box HDMI output to the Xbox One HDMI input.
  2. Connect the Xbox One HDMI output to your A/V HDMI input.
  3. Connect your A/V HDMI output to the HDMI input on your TV.
  4. Notes
  5. This option requires that all devices support audio over HDMI.
  6. Surround sound from your set-top box will not be passed through the Xbox One.
  7. When you perform this kind of basic setup with an A/V receiver, you're passing both audio and video through another device. Depending on your equipment, there's a small risk of audio or video lag.
  8. Connect your set-top box HDMI output to the Xbox One HDMI input.
  9. Connect the Xbox One HDMI output to the HDMI input on your TV.
  10. Connect the audio output from the TV to the audio input on the sound bar using either HDMI or optical S/PDIF cables.

cannon-vgxymk2tgdawonehfad1wklu-4-0.png

cannon 2-vgxymk2tgdawonehfad1wklu-4-1.png

Electronics -... | Answered on Nov 09, 2017 | 171 views


If the motorhome is happy with a normal mains hookup it should be equally happy being supplied by either a generator or an inverter, as long as they are correctly wired and producing the correct voltage.
The only precaution to take would be to ensure no more appliances draw current than the inverter or generator can comfortably supply.

If the inverter is correctly wired and connected and the load is within limits and nothing is happening, the obvious conclusion is the inverter is not producing current.

I suggest you check the inverter is actually working and producing current and if all is good reexamine how it is connected...

Electronics -... | Answered on Nov 05, 2017 | 379 views


https://powersuite.cummins.com/PS5/PS5Content/SiteContent/en/Binary_Asset/pdf/Consumer/specsheets/a-1399.pdf https://power.cummins.com/sites/default/files/literature/rv/F-1123-EN.pdf
Found these do not know if they will help from my quick read they are sophisticated items and would need a proper service if faulty.
I presume the solenoid switches between battery and generator so its possible the contacts are blown and stick and will not release so that may be the fault?

Sorry hope these may help you.........

Electronics -... | Answered on Oct 30, 2017 | 1,444 views

Not finding what you are looking for?
Kingston DataTraveler 101 G2 Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Kingston Electronics - Others Experts

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

387 Answers

SANDIP MISTRY
SANDIP MISTRY

Level 2 Expert

57 Answers

B.Th. Pluijm
B.Th. Pluijm

Level 3 Expert

558 Answers

Are you a Kingston Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...