20 Most Recent Craig CMP741d Tablet - Page 6 Questions & Answers

This solution works for most tablets.

• Power off the tablet

• Tap Power, then press and hold Power + Vol Down until you get a menu, then release

• Look for a Recovery or Factory Reset option, and select it.*PLEASE NOTE THIS WILL ERASE ALL DATA, INCLUDING THE PASSWORD*

Best info found;"The Craig does NOT support a reset mode, none of the typical combinations of power/volume buttons get you to a restore screen.The only supported way to restore to default is a firmware restore mode.http://www.craigelectronics.com/site/pdetails.php?id=414 will tell you how to get the firmware filehttp://www.craigelectronics.com/firm...irmware4.0.rar(install instructions: http://www.craigelectronics.com/firm...guide_741e.doc)HOWEVER! Some CMP741 units will end up stuck on the green Android screen with this version!If that happens, Craig has supplied a cleaner firmware in case that the first one fails, http://www.craigelectronics.com/firm....0_cleaner.rarThe name of the core image in that RAR file is sun4i_crane_aihua_20121121, if that gives anyone clues about the system.Installs the same way - will reboot several times after the firmware install completes, and will fail the first time it runs ("Unfortunately, <process name> has stopped." over and over again). One more reboot will solve that issue.The Flashing software, PhoenixCard 3.06, is VERY buggy. If would not work with my built multi-card reader on my PC or with an add on-SD card reader on that PC. (could not even see the card). On my laptop, the built in PCI Card reader never recognized the card, but it finally burned the card using the add on card reader. Some people suggest disconnecting ALL USB peripherals before burning. Also, I found if the flash burning failed over and over, sometime a reboot caused PhoenixCard to start working again."

my craig tablit is not letting me get in it is frozzon and ask me for my passwotd and i have for gotton my password and i wood like to change my e mail and my password to so can you help me do just that there is a line at the rigth side hat askes me for my password i have turn off the tablit so many ways and hold the botten on and off so place help from evangeline

I put in a password on my tablet and now it would not go to the main menu or open up a page I don know what button to use after i put in my password

which is your version. is it ice cream sandwich. if yes,go to settings. and then you will see a tab named backup and factory reset in the bottom of the settings. did you see it....do it..how it works

craig website has link to fix that

You need to put in your e-mail or gmail information

I cobbled together two RadioShack 5v usb batteries in series and a tiny coaxial plug. A couple of bits of Velcro holds the "Frankenbattery" to the back of Craig to power it. The original battery inside the Craig is soldered in place and should only be "tampered" with by a dedicated hardware hacker. The original battery was apparently made by "Shenzhen HENGWANG Energy Technology Co., Ltd." in China. try contacting "[email protected]" for OEM quantities only. Good Luck.

you can find the manual here:http://www.craigelectronics.com/manuals/CMP622E-IB-E0CV1-B0CV.pdfor herehttp://www.craigelectronics.com/searchprodsupport.php

Can't do anything about that if you don't know the password unless you're a hacker who can change the ROM file, which can also break the device. You're going to just have to wait. No need for caps also :p

No, Nokia 820 is a Windows phone, not an android.

You connect online via WiFi.

Try here: http://www.craigelectronics.com/site/pdetails.php?id=411