20 Most Recent Craig CMP741d Tablet - Page 3 Questions & Answers

I would advise contacting the manufacturer for troubleshooting tips, and/or seek repair/replacement options.

power off then hit reset button (usually a pen tip will work). If no reset hold all buttons down. restore to manufacturer.

I always had to press one of the buttons on the side before the screen would come on for me to unlock the tablet, try it. :)

You need to delete other files that are no longer used.

Hi the drivers should be installed when you connect your tablet to pc, look for icon in notification area when you connect the device and also check tablet. It should recognize it as a storage device.

go to setting,backup & reset/privacy, factory reset

To reset the tablet, you're going to have to do what's called a factory reset. To do this go into the settings, and look for tablet information. Under that it should contain a factory reset button.

connect with your computer and do factory reset.

I recommend you to reset your device.

If you plan is to do Android Programming, you just need to download adb, or a rooting kit like RootThat. If you plan to just transfer files to it, BEFORE plugging in the USB connector, go to SETTINGS, scroll down to USB, and turn off "HOST MODE". Now plug in; the tablet & the computer should recognize each other.

Chances are it has suffered permanent damage and cannot be fixed. Spills are usually fatal for tablets and laptops. Sometimes repalcin the battery will help, but you need sodlering skills to do that.

Reload the firmware. For the 741d, the instructions are here: http://www.craigelectronics.com/site/pdetails.php?id=411

1) Never post your phone number on a web site! 2) There is no manual for a 741d. You might look at some of the tutorials for Android 4.0 "Ice Cream Sandwich", which runs on the tablet. For example, http://www.youtube.com/watch?v=Wlv9o2XvQvI

Depends on the model - Go http://www.craigelectronics.com, find your modem, and download the firmware for it. That is the best way to reset it.

The iCraig (CMP749) uses a MicroSD card, up to 32GB. Source: http://www.craigelectronics.com/site/pdetails.php?id=575

If this is really the Craig 741d, the only fix to a forgotten password is to erase the tablet and reload the firmware. View the installation guide and firmware download at http://www.craigelectronics.com/site/pdetails.php?id=411

make sure you have installed your app on internal memory first of all check your memory in storage option put sync option on also the backup and in developer option check the non market intalation on

This device doesn't appear to have bluetooth capabilities.

you could wait until a day but keep it on the charger because that happened to mine to