20 Most Recent
Brother Limited Edition LS2250PRW Project Runway Sewing Machine Refurbished LS2250PRW - Page 6 Questions & Answers
How to thread a Brothers VX520
should have numbers on the machine to follow. It is about 8 steps. start at 1 and look for 2 and so forth until all numbers have been found. Hope this helps.
Foot pedal isn't working,light is on, brother project runway limited edition, Model CE1100PRW
Need more info? Is the foot pedal plug inserted as far as can go? Sometimes, the plug or jack is simply incompletely inserted. It may look like it's inserted, but it isn't. Turn power off machine. Remove pedal jack from the plug and reinsert fully. Turn machine on. If that doesn't work, have you been using the machine with or without a surge protector? Electronic equipment, including electronic sewing machines, should only be used with a surge protector. Otherwise a power surge can "fry' those delicate electronic components.
3rd. Are you getting any error messages on your display? If you are, those error messages can trigger the machine to shut down until the problem has been identified and corrected. You will need the manual (free on brother.com/support.
My sewing machine says overload what does that mean?
Just repaired my wife's Kenmore with this problem.
How it works:The machine sends power to the motor, and checks if it is turning by looking at expected pulses as light shines through a slotted disk attached to the shaft of the same motor. No Turn = "Overload" error.
How it Presents: From the overload error: If you turn the motor shaft by hand first, then pressed the foot peddle it would run, but there was a "sweet" spot where; if the motor was turning slow enough, it would stop and the next time you pressed the peddle the "Overload" error would occur again.
The Fix: In her case the motor has a poor solder joint on one winding of the motor. A manufacturing error that took years to manifest. A surprising simple repair, if you are comfortable with this sort of stuff. Just disassemble the motor and re-solder. Try it, otherwise the motor must be replaced.
Brother compal opus computer 845 missing parts
Am looking for a part for my brother compal opus model 845 .what it is the part is called electrial plug replacement pin need a set of 2 .i have a phot of part but no part number .i cant seem to send you the phot, regards julie donnelly
Not finding what you are looking for?