20 Most Recent Samsung DW7933LRAWW 24" Tall Tub Built-In Dishwasher With Tact-Button - Page 4 Questions & Answers

I assume it's still under warranty, I would take it back

It’s probably trying to pump water out from dripping pan if you have water leak will activate drain pump by it self turn off water supply and electric maybe need to be pulled out to see if any water on bottom

Check your air gap at the sink. Otherwise there may be something floating in the hose when angled right restricts the flow other times is turnedcand allowed flow.

Water level error. Most likely brake case assy.

Leak error. Code resets after water under unit is dry.

At one of the sites, it is said that this error means leakage. But there is no more information about it. Check or at the bottom of the dishwasher there is no water. Maybe you are lucky.

Check the heating element of your system. Most likely it was the reason.

There is a leak. In the dishwasher there is protection from leaks. If the sensor gets wet, the machine will show you this error. Sometimes leaks may occur due to an oversupply of foam.

Depends on the problem. You can download the manual and "File/Save As" to your Documents folder from here... http://www.manualslib.com/manual/651265/Samsung-Dmb58ahc.html

If the latch is adjustable, adjust it. If that doesn’t work, replace latch

Make sure disposal is working. Also you might have the child lock on.

Try: https://www.appliancepartspros.com or other similar sites.