20 Most Recent Samsung DW7933LRAWW 24" Tall Tub Built-In Dishwasher With Tact-Button - Page 2 Questions & Answers

Duplicate post deleted. Refresh the page to see your question posted. Try a reset https://www.samsung.com/us/support/answer/ANS00087943/ Videos as well https://www.google.com/search?q=unlock+Samsung+Dishwasher+DW60A8050FG ..

If the water valve is clogged or defective, water will not flow into the dishwasher. Water inlet valves are not repairable—if the valve is defective, you must replace it. Over time, calcium deposits can build up in the water supply valve or in the small filter screen inside the water inlet valve.

https://howtofixit.net/samsung-washer-code-sc-or-5c/#:~:text=The%20error%20code%20is%20actually%205C%2C%20though%20it,triggered%20by%20a%20problem%20with%20its%20draining%20function.

What does this nylon cord do? It isn't listed in the pages I looked at. There are parts diagrams and all the parts. https://www.google.com/search?q=samsung+dmt400rhs+parts ..

un power unit for a few minutes then turn back on should reset

No a noise filter is a different kettle of fish. That stops electrical interference noise from affecting your television, radios and electrical devices. The most likely source of the hum is the start capacitor on the motor, or the motor itself. https://www.google.com/search?q=samsung+dishwasher+start+capacitor This has a different idea Humming or Grinding If your Samsung dishwasher makes noise when starting that sounds like a low hum, it's part of normal function. The motor makes this sound as it operates throughout the wash cycle. However, a dishwasher making loud humming noise or grinding sounds could mean that debris is caught in the drain pump.

Samsung Dishwasher Making Noise? Follow These Tips

This says the drain pump, but the drain pump only runs to empty out so it wouldn't do it all the time. https://kitchenbuds.com/dishwasher-guides/samsung-dishwasher-making-grinding-noise/ Lots of other ideas and videos https://www.google.com/search?q=samsung+dishwasher+humming ..

There could be a problem with the control panel on your washing machine and it needs to be repaired.

You can find info on the error code here https://appliancerepairinfo.com/samsung-dishwasher-normal-light-flashing/

It's locked on delay wash

Hello. You question is partially vague but I will try to give you some insight into possibilities. If you're sure power is reaching the washer(checked the ac connections at the base to make sure 120v is present) then next, are there ANY lights illuminated on the front panel? If there is nothing lit, then there is a strong possibility of a blown main control board and/or user interface(the push-button panel *you* choose options from). Now, if there are lights lit and when you hit start, nothing happens, the door switch could be the culprit--its a safety feature that prevents anything from turning on while the door is open. Sometimes, liquid can get spilled into the opening for the latch and drizzle down into the electric lock mech causing a malfunction. Have you had a power outage recently? If the answer is yes, then the main board or user interface could have been damaged--if the current surge doesn't blow out the appliance immediately, *usually* about 3-4 weeks after the episode things will start happening or *not* happening with appliances due to damaged chips on the boards starting to fail. The user interface board is dd92-00030A. The main control board is dd92-00033a. I hope I helped you!

Please see this page I found in the owner's manual for your machine. Error codes F1 to F8 (except F2) require you to unplug the power and turn off the water supply before requesting service, so this will require a professional service person.

it is the pump you have to replace

A Samsung Dishwasher flashing the Quick light indicates a Water Supply Error (Not Enough Water) has been detected by the internal electronic diagnostics. https://appliancerepairinfo.com/samsung-dishwasher-quick-light-flashing/

A Samsung Dishwasher displays a 9C2 error code when a Abnormal DC Voltage has been detected by the internal electronic diagnostics. https://appliancerepairinfo.com/samsung-dishwasher-9C2-code/

A Samsung Dishwasher flashing the Quick light indicates a Water Supply Error (Not Enough Water) has been detected by the internal electronic diagnostics. https://appliancerepairinfo.com/samsung-dishwasher-quick-light-flashing/

You can check on your spray arm by taking it out. You might need to replace it as well. https://www.youtube.com/watch?v=JIKRX2HGeV4 I would check to see if it's clogged

Samsungs have a power "filter board" in the base of the dw.This is different from the main board. This is most likely the culprit and can be checked with a voltmeter. You should have 120 volts coming out of the filter board if it is working. If not, that is your problem.thanks

Go to web site for the significance of this error code - once you know it, you have the clue(s) regarding where to look for your issue problem.