Blodgett DFG-100 Gas Single Oven - Page 8 - Answered Questions & Fixed issues


ask the mfg or google it

Ovens | Answered on Nov 19, 2019 | 39 views


hold down the clock button for 3-5 secs. youve somehow toggled the clock dosplay off.

Ovens | Answered on Nov 16, 2019 | 9,141 views


I have a Newhome GL616 oven, is this a self cleaning oven, if so how do you set it to do it?
Thanks

Ovens | Answered on Nov 13, 2019 | 2,331 views


Can you give us the model number? You can usually find it inside the oven door at the bottom of the oven.

Ovens | Answered on Nov 11, 2019 | 42 views


Thanks for sharing I am show something.
Hello Friends ''YOUR CELL PHONE BATTERY IS ABOUT TO DIE", is the most tragic notification for anyone. Best Wireless Car Chargers when you are driving.
https://wirelesscares.com/best-wireless-car-chargers/

Ovens | Answered on Nov 09, 2019 | 111 views


if it does not turn you could have 2 problems either the control board or the element connection is damaged

Ovens | Answered on Nov 08, 2019 | 44 views


no most elements should last longer between 5 and 8 years the element in my oven is over 9 years old if it is burning out you could have a short somewhere

Ovens | Answered on Nov 08, 2019 | 40 views


HARD TO GUESS ON UNKNOWN BRANDS TRY ASKING THE MFG'S TECH SUPPORT

Ovens | Answered on Nov 05, 2019 | 41 views


First, make sure that the control pad lock (child lock) isn't enabled. This could prevent any of the following steps from working. You can try unplugging the oven (or turn it off at the circuit breaker) for several minutes (5-10). After returning power to the unit, press the key pad button for Clear/Off. This often resets the electronic control. A similar option is to start another self-cleaning cycle. After 1-2 minutes, when you hear the oven start the heating cycle, press Clear/Off. Sometimes if you wait for up to 2 hours after running a short (1-2 hour) cleaning cycle, the door will unlock.

If these steps don't work, then the thermostat is not recognizing that the oven has cooled down to a safe temperature or the door lock mechanism is damaged. Trying to force the door open will probably damage additional parts of the oven. Turn off the oven before starting to attempt to access the lock mechanism. You can try accessing the lock mechanism from the back or by using a bent wire (like a section of coat hanger). Slide the wire between the door and the oven at the top. Then try to pull the locking rod to the open position.

You'll need to either schedule a service call or pinpoint the failure yourself. Check the continuity across the oven temperature sensor, the over temperature limit sensor and the door lock mechanism. Make sure that the oven is cool and unplugged to start. For the door lock, you need to set the oven to the self-clean cycle to obtain a measurement. Check the wiring between these points and the control board if the readings are close to the expected value for your model. For most ovens, the door lock switch test should give a value close to zero. If replacing the temperature sensor or the door lock mechanism doesn't work and the wiring is undamaged, then the control board may need to be replaced. Replace the faulty parts.

I hope this helps. Please add comment with the model number if you need a parts list or diagram for your oven.

Cindy Wells

Ovens | Answered on Nov 03, 2019 | 53 views


ON MY VEHICLE, MY BUTTONS ARE INSET A BIT AND I HAVE TO USE A BALL PEN OR PENCIL TO ACTIVATE.
ON MY ALARM CLOCK, I NOTICE THE CONTACTS ON MY BUTTONS ARE NOT ALWAYS WORKING AND THE
CLOCK RADIO IS JUST SUFFERING FROM OLDE AGE.

Ovens | Answered on Nov 02, 2019 | 39 views


Possible source of assistance, depending on what the exact model number, in case it is not 7580402.
https://spares.bigwarehouse.com.au/index.php?cPath=64677_65668

Ovens | Answered on Oct 31, 2019 | 851 views


It would help to know what make and model of stove it is.
The first step is to unplug the stove from the wall for 30 seconds or more, then plug it back in
Troubleshooting steps

https://www.hunker.com/13416829/how-to-fix-a-ge-oven-showing-error-f2

https://removeandreplace.com/2016/09/06/whirlpool-oven-error-codes-what-to-check-how-to-clear/

GE/Whirlpool/Kitchenaid/Kenmore share many of the same parts, here is a list of error codes.
https://www.partselect.com/JustForFun/Kitchen-Aid-Appliance-Fault-Codes.aspx

Ovens | Answered on Oct 31, 2019 | 46 views


There is a powerful spring in the hinge, and if your oven is like mine, it has pulled the part that goes into the body of the oven, tight to the door. This spring is powerful enough to break fingers, so be careful. When I have had this problem, I have used chopsticks or a wooden wedge to hold the hinge part open in order to get it into the oven. Next time, look for some catches in the hinge mechanism that you can set, before you pull the door off, to stop the hinge from snapping closed.

https://producthelp.whirlpool.com/Cooking/Wall_Ovens_and_Ranges/Oven_Product_Assistance/Removing_and_Replacing_the_Oven_Door

https://www.bobvila.com/posts/29301-can-t-put-oven-door-back-on

Ovens | Answered on Oct 30, 2019 | 44 views


In one word, NO.

Ovens | Answered on Oct 30, 2019 | 52 views


Google

make model manual

and basically, you need to turn it back to 'manual' :>)

you can try flipping the breaker for 30 seconds.

Ovens | Answered on Oct 29, 2019 | 50 views


Contact the manufacturer/distributor to inquire.

Ovens | Answered on Oct 28, 2019 | 51 views


Something may be shorting.

Ovens | Answered on Oct 28, 2019 | 47 views


ASK THE MANUFACTURER'S TECH SUPPORT

Ovens | Answered on Oct 27, 2019 | 44 views

Not finding what you are looking for?
Blodgett DFG-100 Gas Single Oven Logo

74 questions posted

Ask a Question

Usually answered in minutes!

Top Blodgett Ovens Experts

Dennis Boxerman

Level 3 Expert

1300 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Blodgett Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...