20 Most Recent Kirby Diamond Edition Home Cleaning System Vacuum Cleaner Refurbished - Page 8 Questions & Answers

You will need to remove upper cover ,then remove the three screws holding the trans in. Slide out the old drive pedal reuse the cam arm and install new pedal. Slide trans back in and reinstall belt,reinstall rear screw first then the other two . replace cover and test N/D pedal.

first of all take off front assembly. turn over front assembly and then undo clips on the bottom, then turn top knob on front of assembly which hold up the belt, and it will come free then you need to pop out either side of the brushes to take off old belt and re-install new and then turn know to uptake the belt and replace back on the main vacuum body.

this link below will help you http://www.goodvac.com/kb_results.asp?ID=16

The Kirby shampooer deposits the foam onto carpet,and works it into the carpet with the shampooer brushroll.After the carpet is dry,use the vacuum itself to pick up the dry foam and dirt.The Kirby Shampooer is not an extraction shampooer

Send it back It smokes & has no manual You don't want either situation It is defective,obviously

kirby.com or ebay for 1989 to 1992 manual

see utube for a video showing you how

kirbys do not have a reset botton ?

underside of power plant

does the cloth bag blow up when m/c switched on ? if not you have a blockage some where

Who is you finance company is it Ucfs or a secondary? Call the dealer who sold it to you he will know.

go to the link below for help http://www.kirby.com/customer-relations/how-to-videos/

no!, use no shampoo system or cleaners on the memory foam . it will damage the foam itself, and you can almost never get the soap/ water completely out which will lead to molding and odors. contect the manf. and ask about how to properly clean the item.

here's a video http://www.youtube.com/watch?v=dhIoSRs2R4M

First replace the belt. Replace brush roll if worn or bristles soft.

The green light blinking means the belt so slipping. The green light being off means the brush is not spinning at all. The belt needs to be replaced at least twice per year for proper agitation.

raise the carpet height adjuster.... (knob on front) if that dont work.... beats me.

here> http://www.goodvac.com/kb_results.asp?ID=13