20 Most Recent Shark MV2010 Vac-Then-Steam 2-in-1 Vacuum and Steam Mop Purple - Page 5 Questions & Answers

you need to change it air cant get thru

The tube behind the trigger is crimped shut. disassemble to fix the tube,

If it's no longer making steam the boiler could be bad. Shark makes no replacement parts that I know of. Best thing to do would be call the company.

Suggest go online and locate parts diagram for your unit. Use care when dealing with electricity.

check to see if something has not stopped it up. On the bottom of beater bar attachment there is a access plate.

Call cust. service at Shark

Use CLR cleaner in it, let it soak for a day or so, dump it out. fill it with filtered or bottled water from now on

https://www.manualslib.com/manual/452541/Shark-Euro-Pro-384.html

call cust. service

call cust service they will help you

Take off all screws on base plate. Two are hidden under small wheels. Carefully pry under wheels with skinny flathead to pop them off

It is probably clogged

There might be a shortage in the cable or plug....

The indicator light flashing purportedly usually means the battery is low or the vacuum is being charged. https://bestvacuumhq.com/shark-vacuum-brush-roll-indicator-light-not-on

https://www.youtube.com/watch?v=p0mhOezbPLo

this is good for ALL Shark appliances, not just the steam cleaner you asked about http://www.sharkclean.com/

What I see most often is the safety switch in the nozzle goes bad. Shark vacuums are considered disposable and they don't sell parts. That doesn't mean it can't be fixed though. Take it to your local vacuum repair shop and have them bypass the safety switch and service your machine.

Just want to order a new charging cord and batteries for our sweeper.

Follow this link. On the right side one half way down should see download here. I started it to make sure it worked. Started fine so I canceled since I have no need. For future reference most of the time you can find manuals by using model numbers etc followed by .pdf Try it using you SHKC7800.pdf to see what I mean. Good luck

First, turn the power off and remove the battery. Then, separate the handheld from the rest of the vacuum by pressing the "Wand Release" button. Next, hold the dust cup over the trash and press the "Empty" button. Tap gently to empty contents and pull any debris off of the metal screen. If desired, wipe clean with a dry soft cloth. Close the lid. You will hear it click into place. For optimal performance, the dust cup should be emptied each time you vacuum and when the dust cup appears full or debris reaches the "Max Fill" line.