20 Most Recent
Sears Galaxy 30" 1.5 cu. ft. Microhood Combination Microwave Oven 8002 - Page 3 Questions & Answers
We have had a Hampton
we had a similar problem happen with our Hampton Bay Renaissance fan. It turns out that the warranty does not cover this by the way. The lifetime warranty you refer to is only on the fan motor. This is common with most fan manufacturers- just wanted to let you know about this because I think your interpretation of the warranty is wrong.
This fan is really hard to find and so are the parts for it. I would recommend trying to call Home Depot where you bought it or call the Hampton Bay customer support phone number. You're likely going to have to go through one of those mediums. I feel that the second thing (calling technical support for Hampton Bay) will probably connect you to Home Depot too because Hampton Bay is a house brand of Home Depot.
We were able to find the phone numbers we needed here:
https://hampton-ceilingfans.com/hampton-bay-ceiling-fan-reviews/hampton-bay-renaissance-ceiling-fan-light-fixture-popped/
11/24/2023 2:22:05 AM •
Dryers
•
Answered
on Nov 24, 2023
Why is my McClary dryer making a screeching noise?
They always screech when the belt slips. There are usually only 2 reasons this happens.
The drum slides at the lower front are worn out and creating too much friction.
Or
The rear drum bearing has worn out, and again too much friction.
..
11/18/2023 11:46:20 PM •
Dryers
•
Answered
on Nov 18, 2023
No electric getting to my Durabrand W375-K
The screws and spacers for the device are lost. However, the mounting hardware could easily be replaced by three screws and corresponding plastic bushings/spacers. Unfortunately, I could not find any information about a fuse for this device. If you're still experiencing issues, I recommend contacting the manufacturer or a certified repair technician.
10/30/2023 5:01:20 AM •
Dryers
•
Answered
on Oct 30, 2023
Bosch dryer beeps
Two Beeps on my Bosch WTE84100au Condensing Dryer means a thermal overload but also means one of the thermal sensors is faulty .... as if it is always on.
Open the door, pull out the lint catcher and clean around the silver probe (it's like a shiny 1/8" nail sticking into the cavity below the lint catcher). If it still doesn't work (and still 2 beeps), just flick it lightly a couple of times. If it still doesn't work, flick again from the other direction.
10/23/2023 1:09:37 PM •
Dryers
•
Answered
on Oct 23, 2023
The dryer doesnt start, just beeps twice
Check your vent duct or filters for excess lint. Also dryers are protected from incorrect settings and pressing the On button for too long or just briefly. Try a full second.
10/19/2023 2:37:52 AM •
Dryers
•
Answered
on Oct 19, 2023
Not finding what you are looking for?