Top 20
Sears Kenmore Elite Electric Dryer 69278 - Page 8 Questions & Answers
Dryer beeps 3 times error
Hi,
Please view the dryer for any indication of which portion might be causing the error. Their might be a light on that you can use to identify the source within he dashboard of your dryer. Please ensure that you've emptied the lint tray and that there's no left over dried clothes from an older load. If this doesn't solve the issue, please power cycle the dryer once before attempting to use it again.
Thank you.
12/28/2022 12:43:05 AM •
Dryers
•
70 views • 0 helpful votes
My stackable fridgidaire dryer beeps but won't start
- Check if the door is properly closed and latched.
- Make sure the power cord is securely plugged into the electrical outlet.
- Verify the circuit breaker or fuse is working and not tripped.
- If the timer on the dryer is set, try adjusting the time.
- Check the start button to see if it's stuck or if it's working properly.
- If none of these steps work, consider calling a professional for repairs.
1/29/2023 6:27:05 PM •
Dryers
•
32 views • 0 helpful votes
LG Dryer DLEX4000 - will not turn on.
If you have replaced the thermal fuse, main control board, control board behind the start button, and the high limit, and the dryer still will not turn on, then there may be an issue with the motor or the door switch.
First, check the door switch to make sure it is functioning properly. If the door switch is faulty, the dryer will not turn on.
If the door switch is working properly, then you may need to check the motor. The motor could be faulty or there could be an issue with the motor relay on the main control board.
You may want to consider consulting with a professional technician who can perform diagnostic tests and determine the root cause of the issue.
11/22/2022 2:36:24 AM •
Dryers
•
136 views • 0 helpful votes
I have this dryer WESTPOINT WDI-719EC DRYER 7KGand it flashes above the paly /pause button the light what can i do
The flashing light above the play/pause button on your WESTPOINT WDI-719EC DRYER 7KG could indicate an error or malfunction. The first step would be to check the user manual for troubleshooting tips or error codes. If the manual does not provide a solution, you may need to contact the manufacturer or a professional technician for assistance.
One common cause of this issue is a clogged lint filter. Make sure to clean the lint filter before each use to ensure proper ventilation.
Another cause could be a malfunctioning thermostat or thermal fuse. These parts can be checked and replaced by a professional technician if necessary.
It is also possible that the issue is caused by a problem with the control board or other internal component. In this case, it may be best to contact the manufacturer for assistance or to schedule a repair with a professional technician.
It is also recommended to check if your dryer is properly ventilated, check if the vent hose is not clogged and the air flow is not restricted.
In any case, it's always best to consult the user manual or contact the manufacturer for specific troubleshooting steps or to schedule a repair. if i was able to help my cashapp $ralphpapi thank you have a blessing day
1/16/2023 9:22:06 AM •
Dryers
•
33 views • 1 helpful votes
Grundig Tumble dryer model GTN 38240 GCW It is taking ages to dry clothes and does not get as hot as it used to.
If your Grundig tumble dryer is taking a long time to dry clothes and not getting as hot as it used to, there are a few things you can check:
- Clean the lint filter: A clogged lint filter can prevent proper airflow and cause the dryer to take longer to dry clothes. Make sure to clean the filter before every load.
- Check the vent hose: Make sure the vent hose is not kinked or clogged. A blocked vent hose can also cause the dryer to take longer to dry clothes.
- Check the heating element: A faulty heating element can cause the dryer to not get as hot as it should. You can test the element with a multimeter to see if it is working properly.
- Check the thermostat: A faulty thermostat can also prevent the dryer from getting hot enough. You can test the thermostat with a multimeter to see if it is working properly.
If you have checked all of the above and the issue persists, it may be best to contact a professional appliance repair technician for further diagnosis and repair.
11/24/2022 7:40:07 PM •
Dryers
•
95 views • 0 helpful votes
Logik LVD7W18 Tumble-dryer making a knocking sound
Hi,
One might need to oil up some of the internal parts of the dryer that are not electronic. It sounds like there might be friction causing the nocking sound. After the oiling of metal portions of the dryer, the sound should go away.
Thank you.
11/17/2022 9:14:02 PM •
Dryers
•
100 views • 0 helpful votes
My Eureka QuickUp will not turn on.
If your Eureka QuickUp vacuum cleaner is not turning on, even though the switch is in the on position, and it is properly plugged in to a working outlet, there are a few things you can try:
- Check the power cord: Make sure the power cord is securely plugged into the vacuum cleaner and into the outlet. Also, check for any damage to the cord, such as fraying or cuts, which can cause a loss of power.
- Check the fuse or circuit breaker: Check to see if the fuse or circuit breaker for the outlet where the vacuum cleaner is plugged in has tripped. If it has, reset it and see if the vacuum cleaner turns on.
- Check the switch: Make sure the switch is not stuck in the off position. If the switch seems to be functioning properly, you may have a problem with the wiring.
- Check the motor: If the above steps do not work, the problem may be with the vacuum cleaner's motor. The motor may be burned out or damaged and will need to be replaced.
- Contact the manufacturer: If none of the above steps resolve the problem, you should contact the manufacturer of the vacuum cleaner for further assistance. They may be able to provide you with additional troubleshooting steps or arrange for repairs or a replacement.
1/12/2023 3:41:39 PM •
Dryers
•
26 views • 0 helpful votes
What if the heater part stops working what can I do
Take the Dryer apart and check for continuity of the heater element with a multimeter. Then check all three thermal heat regulating device, thermostat, thermal cut out and thermal fuse.
FULL 'make model (what it is)', as first three words in every question please.
12/20/2022 4:56:07 AM •
Dryers
•
38 views • 0 helpful votes
Should dryer vent on inside of the dryer be hot to touch
the dryer exhaust is hot so it would heat the vent hose but it's always a good idea to clean dryer vents about once a year.. you can get a vent snake at home depot or lowes or ace.. one of the worst causes of home fires is dryer lint.. never leave a dryer on when you are not home, make certain the vent hose is tightly connected and lint is not escaping into the room and clean the vent from time to time ..
12/4/2022 3:10:51 AM •
Dryers
•
50 views • 0 helpful votes
Not finding what you are looking for?