20 Most Recent Rowenta IS9100 1550W Precision Valet Commercial Garment Steamer w/ Retractable Cord - Page 4 Questions & Answers

The small transfer water-line to the steamer section has closed up. This is due to contamination of salts, accumulated calcium or other debris. Its baked on and not easy to remove. All I can tell you is: always use filtered water or distilled water in the NEW IRON that will replace this one.

Sorry we do not have that kind of info avail here.

We have no way to look that type of info up at this website.

check the iron's label and see what voltage its rated for. If its from over seas and you are in the states with it, you will be wise to buy another iron. The adapter you would need is called a step up transformer and it would need to be large. 2000w or so. An iron would be much cheaper. The label will say 240z 50hz or 110 60hz. if it says 110 60hz then you have another problem.

If you didn't keep it clean, it may have just burned out. Hard to say.

cheap irons are better as they are subject to the problems of heat steam and corrosion cost to repair will exceed the price of a new on e and that will also if parts can be obtained