20 Most Recent Stoves Premier 720EMa Electric Double Oven - Page 2 Questions & Answers

Stoves-spares.co.uk seems to have plastic part(s)Occasionally parts become obsolete or redesigned for cost reasons. Metal hinge assembly from website BuySpares.com Please check the diagram & parts list if available because on certain models the original door & hinges are obsolete and you will need to order a new door as well as these are the new type hingesYou may be able to just replace the springs, unless your hinges themselves are damaged.

notify the owner for fixing it

CONTACTTHE MANUFACTURER THRU A DEALER

check and test fan circuit for short

The Stoves EFA600H cooker manual can be downloaded here: https://www.cookerspareparts.com/search/ckman-stoves/ckmod-stoves-efa600h/cksku-058585102

A PDF version of the Stoves Newhome EFA600H manual can be downloaded here: https://www.cookerspareparts.com/search/ckman-stoves/ckmod-stoves-efa600h/cksku-058585102

usually a faulty oven thermostat

Sometimes these controls are custom and need to obtain an exact fit OWM replacment (rather than a generic part.)

If your in the UK, try contacting

B Grade Domestics,
1, Armscroft Road, Barnwood, 
Gloucester. GL2 0SQ,

UKSupport: 01452341595E
mail: [email protected]

check that it is not in auto or timer mode

https://woodstoves.net/documents/breckwell/BigE-2-Manual.pdf https://www.hunker.com/13407443/how-to-troubleshoot-a-breckwell-pellet-stove

The manual for the SEB600FP is available on the Stoves.co.uk product site: http://www.stoves.co.uk/products/cooking/built-in-ovens/seb600fp/ . Look on the lower right hand side of the page as you scroll down. The direct link is http://www.stoves.co.uk/media/549804/ST-SEB600FP.pdf . I hope this helps. Cindy Wells

no go google and type in--- user manual for stoves precision 1100 cooker --- and download the pdf version your self

Try here:
http://www.manualsonline.com/ex/thread/view/idThread/3088468

Check how you wired the resistor. The resistor controls the speed of the fan. If its wired wrong, you will get the wrong speeds and the resistor will get very hot. Its normal for them to get warm but not so hot they start to burn. There should be a wiring diagram somewhere on the stove so you can check and confirm if one or more of the wires have been put on back to front.

1. Open the oven door and remove the 2 screws at the side of the inner glass window 11cm above the hinges and lift off the door. Place it somewhere safe!
2. Remove the 4 screws that you can see nearest to the left and right edges of the oven with the door removed. These secure the oven to the kitchen unit.
3. Slide the oven forwards about 20cm out of the unit, being careful not to pull on the cable.
4. Each hinge is held in place by 2 screws at the side of the unit now exposed, about 18cm apart. Remove them and slide out the hinges. Reassembly is the reverse of the above.
5. Note that the hinges have no means of adjustment. If not working properly, renew them.