Kodak EasyShare SV811 (8858946) Digital Picture Frame - Page 9 - Answered Questions & Fixed issues

https://www.amazon.com/Replacement-PANDIGITAL-PI1051DWCB-PI1003DW-PI7000AW01/dp/B009H5T1SG

Stopped doing what ? If it stopped showing the pictures, check their size, rotation and format. If it powered off, check the batteries or mains lead.

The pin is normally a reset button. Your recordings should all be saved onto a small tft card which should secure itself into the cam by pressing it from the end until it 'clicks'. Removal is the opposite, so press it again and it should 'click' out

The pin is normally a reset button. Your recordings should all be saved onto a small tft card which should secure itself into the cam by pressing it from the end until it 'clicks'. Removal is the opposite, so press it again and it should 'click' out.

Usually means that either the film has not been exposed, or has been so grossly underexposed that the images do not register. Try firing the camera without film, but with the back open, and see if a) the shutter works, and b) the lens aperture opens and closes as it should. May need a service, which can be expensive.

I'm sure you think you know what you mean - care to give the rest of us a clue ? Make and model of camera, at the very least, please.

Advertise

its a type of battery, 3v li-ion

The shutter wont fire till the film fully wound on to next frame. check for corrosion in battery compartment.

screen is dying, dead pixels.

turn on/off switch to off.

if its a pan and tilt tripod the rotate the arm sticking out to lock the tilt.

Have you contacted Oben? they may be able to help. https://www.obensupports.com/contact-us

here is the link Solvusoft Microsoft Gold Certified Company

look on ebay for your model number and brand.

clean contacts on battery terminals. https://hallmark.custhelp.com/app/answers/detail/a_id/3918/~/how-to-clean-a-battery-compartment-containing-corroded-alkaline-batteries.

https://www.manualslib.com/ Try here

Probably either the manufacturer or Ebay

it is not necessary

Follow the instructions in the manual ?