Top 20 Kodak EasyShare SV811 (8858946) Digital Picture Frame Questions & Answers

you will need to know the name that was given to that pic / video for you to find it. ask the people that saw it, if they don' t know, well good luck !! ps; they also may be pulling your leg and there really is no pic.

Connect ipod to your computer and copy pictures to an sd card. Place card in photo frame

Your Manual is here. http://data.manualslib.com/pdf/9/892/89118-kodak/d830.pdf?ebfbad50b125292fd98f157c3d2c1c1a

You may view/download the extended user guide here.

transfer the image from PC to memory card ( JPEG Format) and then insert the card in the photo frame. Then turn on and play.

Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

place images etc in any of the following formats

Supporting formats: jpeg,exif, mov,avi,mpeg1,mpeg4.

on one of the following cards,
Supporting cards: SD,MMC, MS,xD, CF,MD.Remote control. USB, 128Mb integrated memory.
or via usb cable onto the intergrated memory
when connected to pc and switched on will show up like a new harddrive or stick.

move pictures to this drive and they will be on frame internal memory.

or move images etc to sd card or usb stick,

insert card or stick into relevent slot or port on frame and switch on

images should be able to be viewed.

I hope this was useful.

Just copy your pictures to memory card and insert it in picture frame.

Getting Started Guide:
http://support.en.kodak.com/app/answers/detail/a_id/18777/kw/sv811

User's Guide:
http://support.en.kodak.com/app/answers/detail/a_id/18780/kw/sv811

I have same problem....help??

if you have tweezer you can remove the said memory card but be carefull to the pin inside of the cardslot.if you cant do that bring service center

you probably have 2 possibilities..
1st ) is to insert the stick ..(card with the picture on ...and choose to play the slide show from it )
2nd) is to connect it to the computer ...and after that the computer will recognize it ..and you will find it in my computer folder by its name or as a removable device (this mostly in case it has a card attached)
Open the folder and inside you will be able to see the pictures that are already there ...top Load pictures just drag and drop pictures in this folder or copy and paste them..after that you will be able to see them on the frame ...make some slide shows with different folders ..or just play all..and it will change them on a preset time ..
Same thing for Mac..bu the frame will be visible on desktop..and same just copy pictures into it(be sure you do not cut them cause you will loose from computer this way ..so ..just copy ..and paste into the frame's folder

Sounds like the memory installed in the frame is full. Try a different memory card or USB stick to see if the various ports are working. Be sure and try a full power off, batteries removed, reset. On the menu, is there a "format" function? if you reformat the memory, you will lose all of the pictures, make sure you have other copies, but that should return it to factory condition.

If you have your camera with you just connect to your computer via USB cable and then wait until your computer recognized it then once its recognize you can now see all the files on your camera and then just copy and paste it to your computer and then print it after that.

On one side of the frame there should be memory card slots and a usb slot.
two ways to do it, take the memory card from the camera and put it in the frame.
Or down load the camera to tyour computer and then with a usb cable upload the picture fram with the pictures you want
Or from your computer load a memory card and then stick it in the frame

SV811 doesn't have a large enough internal memory thats why the picture capacity depends on the inserted SD card or if you transferre pics directly from the computer to display simultanously.

The frame should display as many as on the SD card.

Please follow the link for the manual.

http://www.kodak.com/global/plugins/acrobat/en/service/manuals/urg00721/PictureFrame_GSG_GLB_en.pdf

If missing in the box when purchaced KODAK wil replace the cord free of charge. If lost you will have to purchace the cord.

When calling KODAK pls. have your contact details, model and serial no. ready.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490
If helpful pls. rate me good and/or give me a recommendation

You download directly onto the sd card.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490