Spectroniq PLTV-42HW68 42 in. LCD TV - Page 3 - Answered Questions & Fixed issues
How to programme a irc1597 remote for a baird 32 pr2 tv
Direct Code Entry
- Press and hold the SETUP button until the red indicator stays on, then
release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator
blinks, then stays lit.
- Enter the 4 digit code from the code tables. Note: after a valid code entry,
the red indicator turns off. For an invalid code, the red indicator flashes.
- With your device on, press CHANNEL UP. If the device responds, no further
programming is required. Note: If some buttons do not operate your device, try
one of the other codes for your brand.
- Code SearchIf after trying "Direct Code Entry" your device does not respond, or if your
brand is not listed, try doing a search of the code library for your code by
following these steps.
- Manually turn on the device (TV, VCR, etc.) to be controlled.
- Press and hold the SETUP button until the red indicator stays on, then
release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator
blinks once, then stays on.
- Press the CHANNEL UP button repeatedly (up to 300 times) until the device to
be controlled changes channel. The red indicator blinks, then stays lit.
- Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes
under CBL, etc. If you want to store a VCR code under CBL, etc., first follow
the procedure for Direct Code Entry and press CBL in step 2 of Direct Code
Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the
steps above for Code Search.
6/14/2012 12:46:30 AM •
Spectroniq...
•
Answered
on Jun 14, 2012
•
251 views
It loads an says wrong disc
There really should be something on it identifying the make and model - check the underneath. Assuming you;ve tried various discs to eliminate chance its just a dodgy disc, it will be the lens either dirty or misaligned, I think. If you bought it new it shouldn't be dirty. If you bought it from a store either new or used you should just take it back. You can get lens cleaners from places like WIlkinsons and Debenhams for under $10 but I cant recommend them too strongly - bit hit and miss in my experience. If cleaning doesn't work it will likely be a repair job or bin it - it wont be anything to do with settings or that you're doing anything wrong (unless putting the disc in upside down or something!), so unless a lens cleaner works, you're only option would be to have it repaired. If you knew make and model you might find diy repair instructions on internet but I'd suggest unless you're quite handy it's not easy. I have had a number of cheap dvd players over the years and it does seem to be an area where you get what you pay for - they've generally been unreliable and in some cases had an extremely short life.
12/21/2011 6:09:44 PM •
Spectroniq...
•
Answered
on Dec 21, 2011
•
172 views
Personal DVD player states "no
Could it be the wrong type of disc or a disc that has been produced on a computer and not finalised or maybe a dirty laser/faulty disc motor?
4/17/2011 4:25:51 PM •
Spectroniq...
•
Answered
on Apr 17, 2011
•
79 views
I cannot set the dvd
Note that you should plug the A/V out of the tv to the A/V in of the recorder. Please tell me whats the make and model of the tv and the recorder so that I can suggest the best way to do it
3/6/2011 10:28:15 AM •
Spectroniq...
•
Answered
on Mar 06, 2011
•
45 views
My dvds are playing in black and white
Check your cables going from your DVD player to your TV to make sure everything is plugged in all the way and correctly. If the problem continues try a DVD that you know works and is a color movie and see how it plays.
11/25/2009 3:53:49 AM •
Spectroniq...
•
Answered
on Nov 25, 2009
•
103 views
DVD player will not play Disney made movies
I don't know what BOLT is, as I fixed my last DVD player 6 years ago at Sony. I think the Disney Format is Newer than your DVD player can read.
I remember Sony had a $5000.00 when new DVD player that was the first generation of DVD's. We would get them in for repair and the guy would say "My Radio Shack $99.00 plays all my DVD's but this $5K FIVE YEAR OLD unit won't play them....
There was NO fix for the problem. The New DVD's were beyond the capability of the 5 year old unit.
SO.. Is the Disney DVD a Blue Ray Disk? Or a new format that your older DVD can't read?
AL
4/26/2009 3:39:54 AM •
Spectroniq...
•
Answered
on Apr 26, 2009
•
1,037 views
I need a replacement remote control for JVC NX-BD3 network media system
If you wish to get setup codes, three
digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to
some popular model remote controls are given. Select the 'Timeslide'
option from the drop-down list by the 'Sidebar' at the display
window. It will make search easy.
3/25/2024 3:01:53 PM •
Televison &...
•
Answered
3 days ago
•
127 views
Tcl power comes on but no picture or sound. Tv has backlight lights when powered on
Hello ! It sounds like you are experiencing some issues with your TCL TV. It's great that the backlight lights are working fine. The blinking *********** light and white screen definitely indicate a problem.
One possible issue could be with the internal circuitry or the display panel itself. It's best to contact TCL support or a professional technician to diagnose and fix the problem. In the meantime, you can try power cycling the TV by unplugging it for a few minutes and then plugging it back in.
As for uploading a video, you can try connecting your device to a computer and transferring the video file that way. Alternatively, you can upload the video to a platform like YouTube and share the link for others to view. I hope this helps!
3/22/2024 4:13:19 AM •
Televison &...
•
Answered
on Mar 22, 2024
•
26 views
Not finding what you are looking for?