I think what you mean to say is flashing ember this is an indication of descaling but please before you do descaling first remove the diffuser plate which is based on the top of the drawer just in case the plate is blocked. to remove the plate simply
This is normal you have an air lock all most all new machens do that fill the water tank and only run water fro the cold side don't use the hot run water for 5seconds at a time it should the job
HI THIS IS BECOUES YOU ARE DUE TO DO DESCALE .DO DESCALE ONLY WHEN YOU PRESS THE POWER BOTTOM FOR 5 SECONDS TO GET THE MACHIEN INTO DESCALING MODE .SEE THAT YOU GET DESCALING FOR DOLCE GUSTO ONLY IN SIDE YOU HAVE AL THE HALPE YOU NEED
KINDLY DO DESCALING BUT IF YOU DO YOU HAVE PRESS THE POWER BOTTOM FOR 5 SECONDS AND IT WILL BLINK YELLOW OR ORENGE ONLY THEN YOU CAN DO DESCALEING THE LIGHT WILL GO BACK TO GREEN BUT ONLY AFTER DESCALING
I have experience in Dolce Gusto melody 3. I think that means that the machine warms up the heater. If it continues giving red flasher, i expect that no electricity reaches to the heater or there is something wrong with the heater sensor. In my machine there is Triac (BTB08-600CW) that drives the heater. Please check and show us what is happen.
To solve you oregne light problem you must do this press power bottom for few seconds to make it flashing Orange this means that the machine is now in descaleing mode then do the descaleing product be sure you use dolce gusto descaleing only after you done reset power bottom this should solve the problem.that was a working for descaleing
In my case it was a minor detail: The capsule holder tray has a small magnet on the top right side, you can feel a light pull when you are inserting it in the machine. This magnet became dislodged from the capsule holder, and the machine won't operate and will give you a continuous blinking red light if the magnet is not in place; I found it when emptying a small bin where I put the used capsules. You just have to put it back in place with two drops of glue, or if you can't find it, just order a new capsule holder.
The picture shows the underside of the capsule holder and the magnet next to the slot it came from.
Rosa Sauceda
You woke up a dormant 10 year old post!! Better to post your own question. The area where you poste is to ASK the OP for further details before You answer the question.
The maker or Hamilton Beach would be the place to ask. Or just use a normal knob and a large washer.
https://www.google.com/search?q=welbilt+coffee+urn+60+cups+parts+diagram
..
Check the Operating Temperature:
Ensure that the machine has reached the correct operating temperature. If it hasn't, the indicator light will be on. Wait until the machine is fully heated before proceeding.
Check for Ongoing Programs:
If a rinse or cleaning program is currently in progress, the cleaning button may be flashing. Wait for any ongoing programs to complete before trying to brew coffee.
Inspect the Brewing Unit:
Make sure the brewing unit is properly seated and not obstructed. The brew group should be in the correct position.
If the brew group overflows, it could be due to a blockage or misalignment. Remove the brew group, clean it thoroughly, and reinsert it properly.
Inspect the Coffee Spout and Drainage Area:
Check the coffee spout for any clogs or blockages. Clean it if necessary.
Examine the drainage area at the bottom of the machine. If water is running away onto the floor, there may be a leak. Inspect the drip tray and other components for leaks or damage.
Refer to the Operating Manual:
Consult the operating instructions manual for your Schaerer Coffee Club machine. If the above do not resolve your issues, you may have to contact Schaerer Services.
They make a thousand models. It sounds like the heating element has failed. Generic help and videos in the link but these machines need dealer service at regular intervals depending on the complexity of the particular model.
https://www.google.com/search?q=Dolce+Gusto+coffee+Machine+no+hot+water
..
Question edited for clarity.
These machine need dealer servicing every 6 to 9 months depending on usage. They don't tell you this when you buy them, but I have been fighting these types of machines for the 9 years before I retired. One place had 2 machines and another has 6. Once machine did 1,200 cups a days and was serviced every month. Airport Business Class Lounges.
..
To find Cecilware 3K-GB-LD Cappuccino machine error codes like "ERR 1," refer to the machine's user manual or technical documentation. Alternatively, contact Cecilware customer support for assistance in diagnosing and resolving the specific error code on your machine.
You can replace them but unlikely to repair them. The casing will come apart, with some difficulty.
Remove the old switch, source an identical new switch and fit it.
