Top 20 Plantronics Explorer 220 Bluetooth Headset Wireless Headset Questions & Answers

https://www.plantronics.com/content/dam/plantronics/documents-and-guides/en/user-guides/explorer220-ug.pdf

Have u tried them on a different device??

So here's some info on the bluetooth headset: http://headsetplus.com/product690/product_info.html Also, Jabra's tech support is solid. Consider giving them a call if you still can't figure it out. GL!

Not sure, If the manual, from the car radio says it should pair with Apple bluetooth devices, it must be a setup problem. If your radio is not (yet) compatible with MP3 over bluetooth from Apple devices, you should ask nissan if they have intentions to upgrade the software in the radio. I think you spent enough on your car, to get this kid of service. I'm sure most modern car radio's are compatible, because my 2 year old Toyota Yaris can play my music and take my calls from my iPhone 4 without problems.

Default pass keys for Bluetooth headsets are usually the following:00001234

Try to put your headset in pairing mode, prior to trying to pair it with your phone. To do it, begin with it turned off. Then, if it is the first time it is being paired ever, just by turning it on (i.e. by pressing and holding the call button for some 2 seconds), it should enter the pairing mode. Otherwise, keep holding the call button past the turning on phase (a total of some 8 to 10 seconds), until its indicator light is flashing in red and blue, thus indicating it is in pairing mode. Either way within the next 2 minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or passkey, or PIN) is requested, enter '0000' (four zeros). If the pairing process is successful, your headset should enter the stand-by mode. By the way, if its data sheet happens to be missing, feel free to download it from this location.Really hope you are able to sort your problems out soon.Anyway, please, let me know if I can help you any further . Regards, Carlos

You seem to have asked this question more than once. Anyway, pairing codes for bluetooth headsets are hardcoded. Take a look atthese generic tips. Hope they might suit your needs.Anyway, please, let me know if you need further informations.Regards,Carlos

Please, take a look at these generic tips I posted a long time ago. Hope they might be helpful to you, somehow.Anyway, please, let me know if you need further assistance. In this case, make sure to specify both your heaset and phone makers and models.Regards,Carlos

Turn on the headset by pressing and holding the call control button for 5-6 seconds until the indicator LED flashes red/blue. Release the call control button The Explorer 220 headset is now in pairing mode.

I've seen this happen on a lot of other online forums for this same headset. Even on the Plantronics site itself. It says it is a defective unit and you should take it back to the retailer you purchased it from or contact them directly.

Here are the pairing instructions for the Explorer 220. Plantronics Explorer 220 Pairing InstructionsIf you're still having difficulties, call Plantronics at 800-544-4660 x5538 to make sure they're compatible.Good luck from Headsets Direct!

Here is a link to the instructions for pairing your Plantronics Explorer 220 to your iphone:Plantronics Explorer 220 Bluetooth Pairing InstructionsGood luck from Headsets Direct!

Indicator Lights: 1.Headset Status Headset Indicator Light2.Powering on Steady blue, then intermittent flashes(changes to standby mode)3.Powering off Red appears and goes off4.Standby Blue intermittent flashes 5.Charging battery Red solid light. Light indicator turns off whenbattery is fully charged and headset is off.6.Low battery Triple red flashes7.Pairing mode Blue/red alternating flashes8.Missed call Purple flashes. Press the call control button to cancel flashing light.9.Incoming call Triple blue flashes when ringing.Power on and off:1.Turn on the headset Press and hold the call control button until theindicator glows blue. You will hear ascending tones.2.Turn off the headset Press and hold the call control button until theindicator glows red. You will hear descendingtones. When power is off, indicator stays off.If none of this is helpful then it may be that your battery is dead, if that is the case then you will need to replace the whole headset. The battery's are not replaceable.Good luck from Headsets Direct!

The link below on page 7 has the sequence for turning on your headset (Explorer 230 and 220 work the same). If you're still having problems, then it needs to replaced.Plantronics Explorer 230 User's GuideGood luck from Headsets Direct!

The pass code is 4 zeroes (0000).Good luck from Headsets Direct!

Plantronics Explorer 233 Bluetooth headset does not support the Bluetooth profile Advanced Audio Distribution (A2DP). Your Bluetooth device and your phone both need to support A2DP profile, without this Bluetooth profile your devices are not capable of streaming music.Good luck from Headsets Direct!

Hopefully the link below will help you pair up.Plantronics Explorer 232 User's GuideGood luck from Headsets Direct!

That Plantronics Explorer 220 headset is an older model, it may just be worn out. The Plantronics M20 would be a good replacement to look at, here is the link:Plantronics Explorer M20 HeadsetGood luck from Headsets Direct!

Once you make your phone discoverable, then put the headset into pairing mode by pressing the call control button until it flashes red and blue. The passkey is " 0000 " (four zeros). Here is a link for the pairing instructions:Plantronics Explorer Pairing InstructionsGood luck from Headsets Direct!