20 Most Recent Plantronics Explorer 220 Bluetooth Headset Wireless Headset - Page 7 Questions & Answers

There are about 4 different chargers that can be used, look at the A/C charger with the micro USB port on it, part number 76772-03. You didn't say which you preferred.

Good luck from Headsets Direct - 800-914-7996.

Pairing the Plantronics Explorer 220:

For most phones, select Settings/Tools, Connections, Bluetooth, On. See your phone's user guide for more information.

With the 220 headset powered off, turn on the headset by pressing and holding the call control button for approximately 5 seconds until the LED flashes red & blue. The Explorer 220 headset is now in pairing mode. If you don't see the red/blue flash, press and hold the power button to turn your headset off, and then press and hold the power button again and hold for 5-6 seconds until you see the red & blue flash.

From your phone, go to the Bluetooth menu and select "Search" or "Add Device". Your phone should find the headset which will appear as "2xxPlantronics" in your list of devices.

If prompted for the Passkey (PIN code), enter 0000. If your phone asks for a PIN/passkey, enter 0000 (4 zeros). Pairing is successful when the LED on your headset flashes blue. Your headset is now connected and ready to use.

Here is the link below for step by step instructions.

http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Good luck from Headset Direct - 800-914-7996.

Here is the link for the user guide.

http://www.headsetsdirect.com/pdf/explorer230_ug_en.pdf

Good luck from Headsets Direct - 800-914-7996.

Here is a link to the instructions:

http://www.headsetsdirect.com/pdf/explorer230_ug_en.pdf

Good luck from Headsets Direct - 800-914-7996.

http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Good luck from Headsets Direct - 800-914-7996.

http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Good luck from Headsets Direct -800-914-7996.

The battery on the Explorer 220 is not replaceable. When the battery dies and will no longer hold a charge, you will need to purchase a new Bluetooth headset.

Good luck from Headsets Direct - 800-914-7996.

Si su 220 enciende bien y apaga bien parece que no hay un problema con el aparato. Para enlazarlo con otro aparato bluetooth es importante seguir estas instrucciones. Va a necesitar traducir las instrucciones porque estan en ingles. Aqui esta la pagina del sitio de web.
http://www.headsetsdirect.com/plantronics-explorer-220-bluetooth-pairing-instructions

Bien suerte de Headsets Direct - 800-914-7996.

If you have had the headset any length of time it could be the battery has died and is no longer taking a charge. The battery in the Bluetooth headset is not replaceable.

Good luck from Headsets Direct - 800-914-7996.

Voice dialing with the Explorer 220:

With the headset on, press the call control (answer) button for around 2 seconds to activate the voice dialing. This should prompt your phone and you should typically hear "say a command", then you can say, for instance, "call home". It will then confirm the command by saying "did you say call home?" And when you answer "yes", it should start dialing.

However, just remember that to use voice-activated dialing, your phone and cellular service must be capable of voice-dialing and this feature must be enabled on your phone. See your Bluetooth phone manual for instructions. Also, here is a link below for the Explorer 200 series user guide.

http://www.headsetsdirect.com/pdf/explorer230_ug_en.pdf

Check and make sure that the greenlight is on, on the power supply that plugs into the wall. If you are notseeing the green light then the power supply is not working. Contact the storewhere you made your purchase and see if you can return it or replace it.Youalso have the option of sending the headset back to Plantronics, just includeyour return address, phone number and a copy of your receipt.
Send to:
Plantronics, Attn: Service Center,345 Encinal St, Santa Cruz, CA 95060
Good luck from Headsets Direct - 800-914-7996.

You don't mention if this is your first time pairing the headset, you will need to turn on your blue tooth on your cell phone, the light on the headset should come on flashing red/blue. If it does not refer to sub pairing instructions below. The cell phone should find the headset. 2XX Plantronics in your list. If the pass key is needed it is (four zeros). Second time pairing or more than one device, turn on bluetooth feature, headset turned on, press and hold the call button for about 5-6 seconds. Release button and set headset aside. On cell phone hit bluetooth menu, search for add device. The cell phone should find the headset.

Good luck from Headsets Direct - 800-914-7996.

here is the pdf of it.

http://www.greennet.ca/ebay/Explorer220_PLN-7551601/explorer220_datasheet_en.pdf

if it doesn't work try going here.
http://phone.manualsonline.com/manuals/mfg/plantronics/220.html

Then click on "get this manual" and when a window pops up click "skip special offers"

It sounds like the headset is already connected to a device. Try holding down the center control button to put it back into discovery mode and then use your phone or device to locate the headset. The link for the manual is: http://www.plantronics.com/media/media_resources/literature/user_guides/explorer220_ug_en_es_fr_pt.pdf

While the Explorer 220 has the "quick pair" feature, it does not have "multi-point" which allows you too pair the headset to more than one device at a time.

Pairing Instructions should you need them: Pairing Plantronics 220

Good Luck from Headsets Direct!

Go into your phones settings and find Bluetooth devices.Then there should be an add new device or search for device. when iit is searching press the talk button the one on the outside. the phone should find it then.

Welcome to Fixya

I am sorry to infrom but the particular part that you are referring is not available in the market separately. You might need to buy the whole headset.

Thank you for using Fixya! If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

In order to put your car kit in pairing mode, starting with it turned off, press and hold the MFB for some 6 seconds, until its indicator light is flashing alternately in red and blue. You'll be prompted to choose a language, and, then, to pair it with your phone. Then, make your phone's bluetooth application search for new devices. After a little while, your car kit should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey, or passcode) is requested, enter '0000' (four zeros).

By the way, detailed instructions on how to pair it with your phone (illustrated with pictures) can be found on its user guide; In case yours happens to be missing, you'll still be able to find it here.
Hope you are able to sort your problems out soon.

Anyway, please, let me know if I can help you any further.
Regards, Carlos

Hi,

The PIN is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download Adobe Reader.

Thanks for using FixYa.

Hi,

The passkey or PIN is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download Adobe Reader.

Thanks for using FixYa.