20 Most Recent Plantronics Explorer 220 Bluetooth Headset Wireless Headset - Page 2 Questions & Answers

Most bluetooth headsets use a universal "0000" (four numerical zero's) for the passcode. This device should be no exception from this universal rule.
Hope this helped you?

So here's some info on the bluetooth headset: http://headsetplus.com/product690/product_info.html Also, Jabra's tech support is solid. Consider giving them a call if you still can't figure it out. GL!

Have u tried them on a different device??

Not sure, If the manual, from the car radio says it should pair with Apple bluetooth devices, it must be a setup problem. If your radio is not (yet) compatible with MP3 over bluetooth from Apple devices, you should ask nissan if they have intentions to upgrade the software in the radio. I think you spent enough on your car, to get this kid of service. I'm sure most modern car radio's are compatible, because my 2 year old Toyota Yaris can play my music and take my calls from my iPhone 4 without problems.

On your phone, make sure bluetooth is turned on (settings, general).

While your phone is in discovery mode, turn your bluetooth device on and put it in discovery mode ***(usually you have to hold the power button for 7-10 seconds)***

Your phone will find the device, and you will be prompted to enter the devises PIN number (often 0-0-0-0). Your phone should pair with the device then.

Had the same problem and called Plantronics. They reminded me about putting the earpiece in "Discovery Mode" by holding down the button when turning it on until it flashes blue/red. Then have the EVO scan for bluetooth devices. It found mine right away.

you should be able to pair it to at least three devices passcode is 0000