20 Most Recent Crown XTi 4000 Amplifier - Page 2 Questions & Answers


Switch off the amplifier for some time and allow it to reset. disconnect the speakers and reduce the volume level before you put it on. If the power does not come on you will need to probe inside. Get help if you are not familiar but check on the power lines coming in for failure of fuse, the secondary power supply section transformer or the smps power. Hope it would not go further to this but check this out.Check for shorting inthe outputs, if so disconnect and test. Good day

Crown XTi 4000... | Answered on Jul 31, 2010


Try here:

http://www.crownaudio.com/express.htm

Crown XTi 4000... | Answered on Apr 17, 2010


The only component I can think of that fits your description is a bypass capacitor for filtering high frequency interference. That should NEVER get hot. This amp is going into protective shutdown. This unit should be brought in for service. Continued attempts to run this will end up causing additional damage. Where are you located?

Dan

Crown XTi 4000... | Answered on Mar 25, 2009


Not most service manuals can be downloaded unless you use a model close to the original.
Try service manuals.com

Crown Audio... | Answered on Oct 30, 2019


Almost anything. Take it to a Crown Authorised repair service.

Crown Audio... | Answered on Mar 17, 2019


http://www.fixya.com/tags/crown_amplifier_fault

Crown Audio... | Answered on Dec 31, 2018


If you have eliminated any shorted speakers, cables etc, then the only other cause is a shorted device on the power output board. Probably a device on the heatsink.

Crown Audio... | Answered on Oct 11, 2018


  • Open internal fuse
  • Defective power switch

Crown Audio... | Answered on May 15, 2018


Hello, Sylvia -

I have no idea what entity you meant to receive your question.

You posted in the Fixya.com website, which is intended for asking and answering questions on how to go about REPAIRING THINGS. Plus, your question landed in the Fixya category for Crown (brand) Audio Players & Recorders.

Perhaps you meant to message Netflix, or your local public library, or a person from whom you borrowed the DVD, or someone to whom you sold the DVD, or . . .

Best wishes.

Crown Audio... | Answered on Feb 25, 2018


The fan does not start to spin until the ambient temperature increases.

Crown Audio... | Answered on Sep 05, 2017


Is the fan supposed to be on. On some units it runs all the time on others when the temp hits a certail level. Which is it for your baby?

Crown Audio... | Answered on Sep 04, 2017


It's best to assume there is a short circuit in the power amp board. The unit is going in to protect mode to stop it blowing fuses etc. Could be caused by bad speaker wiring or connections by the way.

Crown Audio... | Answered on Dec 02, 2016


Component over heating .
Main input output ic defective.

Crown Audio... | Answered on Nov 01, 2016


Do you mean that you would like to change from a 3 wire cannon plug to a 1/4" female?

Crown Audio... | Answered on Aug 24, 2016

Not finding what you are looking for?
Crown XTi 4000 Amplifier Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Crown Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Rob Beech

Level 2 Expert

63 Answers

Are you a Crown Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Crown Audio Players & Recorders

  • Crown Audio Players & Recorders

Most Popular Question

fan dont work when power turn

  • Audio Players & Recorders
Loading...