20 Most Recent
Crown XLS 602 2-Channel Amplifier - Page 5 Questions & Answers
Amcon[crown] dc300a amp has loud
Question...does the problem occur when the power amp is on only by itself ( no pre amp power ).
If it does, then because of the age of the amplifier, it could be either a capacitor, or a transistor has died. Capacitors and transistors both have age issues. Since that is a nice amplifier, I would suggest taking it to a shop because there are MANY things that can cause this condition. Subsequently, because of the age, if one component has failed, there are sure to be more to come. If you wish to keep the amp, you should consider getting it rebuilt. Hope this helps... Rob
Crown Xti 2000, signal to both channels, no sound
common problem with xti series... all the amp needs is a soft ware update contact crown and they can sort it for you... you dont have to send the amp back to them. it was a verry common fault with all the early xti amps..
Can I get a schematics
Hi,
Yes, I can provide you schematics of Crown IC-150
Click
HERE to download required sechamtics, check 4th entry in list on that page, right click the link and select Save Target As to download pdf schematics file directly in your computer.
Hope these info will help you.
Let me know if you have additional question.
Thanks.
The main board in the crown macro tech 2400 is
Do you know for a fact that you do not have a working board? If there's a problem with anything from speaker mismatch to loose transits, the board will not operate. This receiver is made of discrete components so, it couldn't be that hard to fix or maintain. But if you want a new or used one, they have them on ebay though there a little pricey.
I have a Crown Power Base 1 AMP, with a buzz. It
Buzz through speakers usually means it is picking up humm from a power source. Check your mixer and amp input (gain) levels. If one is turned up really high you will get buzz. If that doesn't work check where it is plugged in. Is it sharing power with another electronic piece of equipment? You can also buy a power conditioner (I believe it is called). It will put out "clean" power (power without Hz humm). They can be expensive though. Less exspensive mixers will put out humm. Lower that gain as low as possible and raise the amp gain. Or vice verse
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Can f2100 remote work on my dishtv box?
The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?