20 Most Recent Ebac CS60 Dehumidifier Dehumidifier - Page 8 Questions & Answers

0helpful
2answers

How to use hydrofarm dehumidifier model no acdh20a and/or where to find a user manual for it?

Contact Hydrofarm directly to request a manual for model acdh20a. In it, you will find instructions for use.
10/29/2020 5:24:49 PM • Dehumidifiers • Answered on Oct 29, 2020
0helpful
1answer

Where can I get a free instruction manual for an uberhaus MDK 40AEN3 BA5 dehumidifier please

I got this UberHaus dehumidifier and I was not given instructions on how to use it properly
10/7/2020 2:33:34 PM • Dehumidifiers • Answered on Oct 07, 2020
0helpful
1answer

What temperature should I use for my basement in the dry mode. .?

If you are referring to your humidity setting for an average basement in summer heat between 55%-60% finding 60% to be more ideal.
9/9/2020 8:50:25 PM • Dehumidifiers • Answered on Sep 09, 2020
0helpful
1answer

I have a dehumidifier 043-5792-2 works great but recently started leaking on the floor

I had the exact same problem with this exact dehumidifier the bottom of the drawer was cracked iv been trying to find a new drawer
9/2/2020 10:14:06 PM • Dehumidifiers • Answered on Sep 02, 2020
0helpful
2answers

Idylis 0526011 does not work

SET IT TO LOWER SETTING
8/11/2020 3:05:18 PM • Dehumidifiers • Answered on Aug 11, 2020
tip

Dehumidifier is running but no water is in bucket

If you have a dehumidifier that is not producing any water then you are wondering what you need to do to get this thing to work for you. In some cases you may be able to do something and in other situations there may be nothing that you can do.

If you do not hear the compressor running and the unit says that the humidity in the room is higher then the setting, then you have a problem with your dehumidifier.

A few things that can cause this are:

The circuit board relay has gone bad…replacement of this board will often cost more then a new unit. This also is a very common problem with many dehumidification units.

The compressor has failed…if you hear a buzz for a few seconds, every few minutes, then you have a bad compressor or at least bad start components on the compressor. Either way it again is a costly repair.

If the compressor is running and the coils are not getting cold then you have a refrigeration system leak. Recharging or fixing these units is very difficult and is another costly venture compared to the price of a new dehumidifier.

If the compressor is running but the fan is not, this also will cause low water production and continual freezing of the coil.

If the compressor and the fan are running but the coil is totally blocked then you will get no water production. Air needs to be continually moved over the cold coil to get the water out of the air.

If nothing is running, then you may also have a control board failure. Or the humidity sensor or humidistat has gone bad which tells the machine to run. If the sensor says that the humidity is low enough then it will never run.

Also if nothing is running check the float switch or the bucket switch. Many of these switches are very touchy and if you do not have the bucket in place just exactly right it will not trip the switch to allow the unit to run. These switches often are more fragile then they should be and break easily. The good thing is that when available they are easy to replace and relatively inexpensive.

There are some parts available for a few brands, but with the prices for most of the parts that you can replace running anywhere from 40.00 – 80.00 dollars, replacement parts with labor to install them, makes a repair more then the few hundred dollar cost of many of these dehumidifiers.

As you can see there are quite a few things that can cause your dehumidifier not to work. Systematically go through the list and eliminate things to get to the bottom of the issue causing your problem and then decide if it is worth spending the money to try to fix the old unit. Only you can make that decision.

http://www.fixya.com/support/r4662033-dehumidifier_freezing_up_not_working

http://www.fixya.com/support/r3877515-dehumidifier_problems_dehumidifier

http://www.fixya.com/support/r4688381-dehumidifier_problem_shows_bucket_full

on Aug 11, 2020 • Dehumidifiers
0helpful
1answer

I have an whirlpool gold ad50gpusb from canadian

For the others who follow I have the same model, same problem on a 2 year old purchase made in 2014. This unit has a pump (and a hose) to drain the condensate. The pump light started blinking about a week ago, turning cycling power worked for a while, until pumping stopped altogether. After investigating: -the hoses are not blocked but there was some algal growth in the tray which I cleaned -the pump no longer pumps. -my favorite parts suppliers and other on-line sources have no record of the model/parts etc. -Called "whirlpool" consumer line in manual -Whirlpool has been purchased by Garrison and that company has no parts for this discontinued model but did provide a phone number for the pump 800-799-0991. Unfortunately the cost of this small solenoid pump is $74. I will drain the condensate via gravity to a floor drain as I don't see spending that much for something that broke so quickly and appeared poorly made..
7/13/2020 7:14:25 AM • Dehumidifiers • Answered on Jul 13, 2020
0helpful
1answer

What does the error code ER3 mean, on a Dri-EazPHD 200 dehumidifier?

https://www.jondon.com/media/pdf/manuals/DP-F515_manual.pdf ER3 CONTACT SERVICE CENTER Unit in defrost too long. Check defrost sensor cable for proper connection. If error persists, sensor assembly may require replacement. Contact service.
7/7/2020 1:29:27 AM • Dehumidifiers • Answered on Jul 07, 2020
0helpful
1answer

How does a customer contact Keystone Dehumidifiers?

https://www.manualshelf.com/manual/keystone/kstad70c/warranty-english.html See phone number in web link above. Beware FIXYA spam and fraudulent phone numbers often posted for many years here.
7/2/2020 2:09:23 PM • Dehumidifiers • Answered on Jul 02, 2020
0helpful
1answer

Display shows EC and dehumidifier does not operate.

  1. Check that the filter in the unit is clean.
  2. Check that the room temperature is above 41 degrees.
  3. Check that the humidity isn't set too low, recommended humidity is 45~50%
  4. Make sure that the unit has plenty of space all around to allow for sufficient air circulation.
6/24/2020 8:23:32 AM • Dehumidifiers • Answered on Jun 24, 2020
0helpful
1answer

Why does my dehumidifier trip the breaker when i plug

Load to big for breaker , Faulty breaker , Short circuit on dehumidifier .
3/9/2020 2:36:28 PM • Dehumidifiers • Answered on Mar 09, 2020
0helpful
1answer

My KSTAD70B's compressor keeps running even while a)it's well below the humidity threshold and b)the unit power is off.

Your humidistat is stuck in the "on" position. Probably need to replace it.
1/31/2020 5:41:10 PM • Dehumidifiers • Answered on Jan 31, 2020
0helpful
1answer
0helpful
1answer
0helpful
1answer

I have a garrison dehumidifier on wheels. Don’t know what size. Seems to work perfectly but does not draw the moisture out of the air. I cleaned the filters but don’t know what else to do.

A dehumidifier works in a similar way to an air conditioner, cooling the air that passes through it so water vapour will condense and collect into a container. If the fans are working and air is circulating through the unit but no water is being collected the internal refrigeration system probably has a fault...
11/26/2019 1:48:38 AM • Dehumidifiers • Answered on Nov 26, 2019
0helpful
1answer

ForestAir dehumidifier:No water in bucket, and power on, why no status display and fan and compressor not working

Could be the humidity is low enough it isn't turning on. Try to lower the humidity setting to see if it will turn on. Once the humidity gets down to about 50-55%, dehumidifiers don't work very well at pulling out the humidity..
11/10/2019 4:30:43 PM • Dehumidifiers • Answered on Nov 10, 2019
0helpful
1answer

The condensate is draining into the bucket despite the fact that I have a hose attached. How can I fix this?

Pull out bucket and see if the hose it attached to the drain connector/ sometimes it pulls away:
11/9/2019 12:05:08 PM • Dehumidifiers • Answered on Nov 09, 2019
0helpful
1answer

I HAVE A HONEYWELL DEHUMIDIFIER AND ITS DISPLAYING AN EH ERROR

Code EH code indicates that the humidity sensor is malfunctioning. Needs to be replaced.
11/5/2019 5:16:34 AM • Dehumidifiers • Answered on Nov 05, 2019
0helpful
1answer

How to repair a E9 error code on my noma dehumidifier

The manual says to contact customer service 866-827-4985. I believe the code refers to a sensor error.
11/4/2019 10:16:29 PM • Dehumidifiers • Answered on Nov 04, 2019
Not finding what you are looking for?
Dehumidifiers Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Ebac Dehumidifiers Experts

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you an Ebac Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ebac Dehumidifiers

  • Ebac Dehumidifiers

Most Popular Question

ebac xl dehumidifier not collecting

  • Dehumidifiers
Loading...