20 Most Recent Jackson 25 in. TempStar HH Free-standing Dishwasher - Page 3 Questions & Answers


Hello there:
Water-heating cycle Many dishwashers heat the wash and/or rinse water to a higher temperature, as the cycle calls for it. In these cycles, the dishwasher pauses after it has filled with water, waiting for the water to reach the pre-set temperature. What happens next, depends, as follows: On some units, the pause is timed and the unit continues after the allotted time. On others, the cycle can't continue until the water reaches the higher temperature. If you have this type of dishwasher and the water isn't being heated (say, because of a problem with the heating element or thermostat), after the unit stops at the heating cycle, it never continues. When you repair the heating-system problem, the "cycle problem" is fixed too. Timer Timers don't often fail. But if every other part of the dishwasher seems to be working properly and the timer knob seems to be stuck in one place--doing one function continuously--the timer may be at fault. Dishwasher timers can't be repaired. If yours is defective, replace it.

Jackson... | Answered on Apr 01, 2010


Hi


Thanks for using FixYa. Please check for the following if your dishwasher is not working--


1. Fuse (blown or tripped).
2. 120 VAC supply wiring connection faulty. Repair or replace wire fasteners at dishwasher junction box.
3. Electronic control board faulty.
4. Motor (inoperative, check resistances).
5. Door switch (open contacts).
6. Door latch not making contact with door switch.
7. Touch pad circuit defective.
8. No indicator lamps illuminate when START or OPTIONS is depressed.


Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Jackson... | Answered on Mar 09, 2010


1)Temperature is more than 90-100degree means the steam will comes from the rinse arm automatically (as u indicated thermostat chances is there)
2)check the heater contactor is getting switched off interminently(if it is not getting off problem on thermostat)

Jackson... | Answered on Jan 08, 2010


The problem is hard water not soap. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the way your dishes look after the first load. It is also very affordable (like 70 bucks). Go to www.dishwasherfilter.com to find out more info.

Jackson... | Answered on Sep 07, 2009


Hi!

You need to buy a calcium lime remover/lime remover and if you can see a bad lime deposit then please buy a stronger delime.You need to put the delime in the unit and run it through a cycle.Repaet this procedure more than once to get optimum results & get rid of the scale. Also try and delime it once in a month or two so that this doesn't happen in future.

Please rate this solution.

Thanks
Rylee

Jackson... | Answered on Feb 13, 2009

Not finding what you are looking for?
Jackson 25 in. TempStar HH Free-standing Dishwasher Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Jackson Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Kimberly Opager
Kimberly Opager

Level 1 Expert

36 Answers

handygirl911
handygirl911

Level 2 Expert

66 Answers

Are you a Jackson Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jackson Dishwashers

  • Jackson Dishwashers

Most Popular Question

high limit light goes

  • Dishwashers
Loading...