Intel Pentium Dual Core E2140 / 1.6 GHz processor (BX80557E2140) - Page 6 - Answered Questions & Fixed issues

the fox hyjacks year 2014 windows 7, 32bit or 64,? bet 32. Haier a600 laptop first off what in the world is Haire, ? not sold here in uSA. posted to USA computers, so.... but you said LAPTOP:... also your internal speakers are bad, buy externals use that. if you plug in ear bugs or real headphones to any laptop 3.5mm round phone plug on side of the laptop and those sound ok then that proves the internal speakers are bad, some get wet and fail. or rot out. (paper speaker cones) when I google Haier a600 laptop it shows cell phone why? and you posted to intel. so my guess is you have a laptop but you are confused to who made it, and true model name. here is the HAIER web site, can you find your PC there? http://www.haier.com/pk/pc/Notebook/Y11C.shtml it says buy them in India, are you there?, if yes why ask USA yankee's about PC only sold there. (or Pakistan) we don't have them here. next time buy a Dell.com PC. but do contact them and get help. their support seem weak.

Try clean install network driver. If doesn't work try some live cd/usb with inbuilt networking.

Try 0123456789 or 1234567890

aiden check out the computer dealers sites.

Hi, Please read this post ... http://www.fixya.com/support/t9941342-computer_when_turn

http://www.tomshardware.com/answers/id-3453256/front-panel-connected.html

The usual method of resetting any BIOS is to remove the backup CMOS battery (usually a Lithium coin cell) and then short the terminals for a while (e.g. a minute) with a wire. Then, when you restore the CMOS battery to the BIOS, it sees the settings make no sense and then sets them to default. I warn you that I don't know what an Artx Ultraviolet is, as it doesn't seem to return anything on Google. It's very hard to reset the memory in some modern machines, and more sophisticated motherboards have a reset button to restore default settings. That's all I can suggest without more information.

Memory Card or USB Drive Recovery Software

Best setting are the factory defaults in bios, because all hardware and the o\s have been rigorusly tested,backup before trying new settings.check the intel cpu wether it monitors the load on its processor. most typically overclock at 40% load if you are into gaming there are to many parameters. depending on your software apps like autocad,then more ram for virtual drive to place work in may help, 8 more

best to remove all ram and any hardware changes, replace original ram,also delete new opane drivers speakers and all peripherals. Also remove battery tap power button for 5 seconds. reboot to bios and enter, select setup defaults. now you should continue to original splash screen.this may seem odd, but I have seen a mouse dongle left in and caused a trouble during troubleshooting. this is why as an I.T.TECH, I recommend removing everything, such as speakers,headphones,ext hdd Otherwise check utube search .for intel optane

Yes. The DG33 series can support the Q9400. See this document: https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/desktop-boards/DG33FB.pdf

https://downloadmirror.intel.com/14367/ENG/BIOS%20Update%20Readme.pdf https://www.biosflash.com/e/bios-boot-diskette.htm

https://www.intel.com/content/www/us/en/support/articles/000023694/emerging-technologies/intel-realsense-technology.html https://www.intel.com/content/www/us/en/support/articles/000023716/emerging-technologies/intel-realsense-technology.html https://www.intel.com/content/www/us/en/support/articles/000006224/emerging-technologies.html https://www.intel.com/content/www/us/en/support/articles/000023696/emerging-technologies/intel-realsense-technology.html https://www.intel.com/content/www/us/en/support/articles/000023696/emerging-technologies/intel-realsense-technology.html https://www.youtube.com/watch?v=RHB70uo_r_E

you have done something wrong on the BIOS part of your system that's why it installed jumber in its inappropriate mode or setting which is against the normal setting of the system.To solve this please or recall what part of the BIOS that you mistakenly configured or in any installing activity you have done.Then try to check out the changed data or setting in the BIOS.By the way BIOS is the first to start up in your system, you may access it by pressing "delete" commonly. If you haven't recalled the previous activity you may contact the management or visit the website of Intel motherboard.That's all I can help.

Overheating

The processor in the PC is not connected to the iPhone directly, so there isn't a compatibility issue. If you can't see the phone when it's connected to a USB port, then the port is the problem, tot the processor.

Things to try:

1. Plug in the ethernet cable then restart the laptop.

2. Right click on your local area connection and make sure its enabled

3. Make sure your wireless adapter is disabled.

4. Check if you need a static ip address on your work network. and if so have them assign you an ip address for your laptop.

5 Test your computers ethernet port on another wired network to make sure that it is good.

6. Get a usb to ethernet adapter for your laptop if your ethernet port is bad on your laptop.

It should support any hard drive or solid state drive with a sata interface

Hello, Tymofii - Apparently the Intel D945GTP is a motherboard for a computer. I have not found a manual for that motherboard. Instead, I found technical product specifications for it: https://www.intel.com/content/dam/support/us/en/documents/boardsandkits/desktop-boards/945/D945GTP/D945GTP_TechProdSpec.pdf It is a PDF document, so you will need Adobe Acrobat Reader software (free). If you choose to download and save the PDF document to your computer, I suggest you give the document a file name you can find again easily . . . something like: Intel D945GTP Tech Specs . Best wishes.

https://downloadcenter.intel.com