20 Most Recent
Vtech DECT 6.0 Cordless Phone with Digital Answering System - Page 2 Questions & Answers
How do I do call forwarding
Call forwarding is NOT a function or feature of the
cordless phones.
It is offered by some telephone service providers, but their
procedures are proprietary and specific to that individual
telephone (service) company -- if they offer it at all.
Call your service provider and see if they can help you.
Good luck!
I have a vetch mod# CS6114 I checked the base unit and it gets power to charge phone but I can't get a dial tone. I even hooked up to another line and still won't work.
This sounds like a registration problem, the
handset must be de-registered from wherever
it thinks it is and then registered to your base.
=====================================
( I ). First, to de-register a cs6114 handset ---
0. Start by taking off the battery compartment cover.
1. press [menu]
2. scroll up/down to "Settings"
3. enter * 7 8 9 0 #
4. scroll from "Test Base" to "Test Handset", press [select]
4. scroll down to "next page", press [select]
5. scroll down to "Register Clear?", press [select]
6. display asks "Confirm?" or "Register Clear??",
press [select]
7. display reads "Ok" and chirps, press [ off ]
8. UNPLUG THE HANDSET BATTERY
(this is why the cover was off)
9. Wait ~30 seconds, re-connect the battery &
replace the cover
10. display reads "Not Registered"
===============================
( III.) To register the cs6114 handset to the base:
1. press [Find Handset] on the base and hold for
~4 sec until the "In Use" lamp lights.
2. press # on the handset and set the handset into
the handset cradle on the base
3. within 30 seconds or so, the handset will either
chirp and display "Handset Registered", then
"Handset #x" or it will say "Registration Failed".
NOTE: the battery must be well charged prior to the
registration process, a weak battery may cause a
"Registration Failed". Charge the battery for a
few hours and try the registration ( III ) again.
NOTE 2: Some cs6114 bases do not have the "In Use"
lamp indicator. To register the handset simply park it
displaying "Not Registered" in the base cradle and wait
for the registration to occur. Pressing # as above may
be required, maybe not.
===============================
Good luck !!
My vetch phone shows "new voicemail". how do I delete this
To clear the "New Voicemail" display from the handset
is a slightly different procedure for each model of cordless
phone.
Try the following (tested on my own cs6229 phone):
press [menu]
scroll to "Clr voicemail"
press [select]
display reads "Turn Off Indicator?"
press [select]
phone will (chirp) press [off ]
Or, this one (tested on my own cs6114 phone):
press [menu]
scroll to "Settings"
press [select]
scroll to "Clr voicemail"
press [select]
display reads "Reset VM Icon?"
press [select]
phone will (chirp) press [off ] [off ]
Other models, check your manual. The model number
is on a small sticker under the battery in the handset --
enter this number at
www.manualslib.com to get a free
copy of the User's Manual.
Good luck!
--------------
How to check voicemail on my vtech 6.0 phone
VoiceMail is not a function or feature of the cordless phone.
VoiceMail is an option offered by some (not all) telephone
service providers, and each of those who do offer the feature
employ specific procedures unique to themselves.
Check with your Telephone Service Provider to see if you
have or can get a VoiceMail service activated and how to
go about using it.
OTOH, some cordless phones have an associated Answering
Machine System to answer incoming calls, save a message,
provide for you to access and manage the system remotely
(ie, call-home and play your messages, delete some or all, etc.)
The specific how-to's for all of this are best viewed in the
original Owner's / User's Manual which is easily downloaded
from
www.manualslib.com ( look underneath the battery
inside the handset for a small sticker showing the proper model
number to look for ( ie, CS6229 ))
Good luck!
------------------
Manualforcs6114
To obtain a replacement manual, you'll need the precise model
number of your phone: this is found on a small sticker
underneath the battery inside the handset. Take this
model number ( eg, CS6114 ) to
www.manualslib.com
and you can download a free copy of the manual.
Good luck!
How to register hs
It would help to have the model number of the base ( found on a sticker on the bottom of the base ) and the handset (under the battery) but the following works for many models: Press and hold the "Find Handset" button until the "in use" lamp comes on. Press the
"#" key on the handset, then place it on the base... if it is going to work, in a minute or less it will chirp and announce "handset registered". If it shows "registration failed", the base may be "fully populated" and cannot accept another handset: many models are limited to only 5 handsets. To start over by clearing the base registry, press the "Find Handset" button until the "in use" lamp
lights, then continue to hold "Find Handset" until "in use" begins to
blink. Release, then press again the "Find Handset" button for a moment. The base should chirp, and be ready to register handsets again... try again as above until the maximum is reached. Good luck!
Not finding what you are looking for?