20 Most Recent RCA 3-Device Universal Remote with Dedicated DVD Menu Key - Page 4 Questions & Answers

Use the Auto Code Search instructions. You can find instructions at: http://www.voxxsupport.com

You can find your remote by looking under the battery plate.

http://www.eliztech.com/remotes/rca-codes-4digit.php hope it works.... rate please

how to program

TV SCREEN COMPRESS.

The electro touch that makes to control the VOLUME is stuck! Open ur remote, and look at the board where the VOLUME button is located, u will see a BLACK electro pad have shorted that part! Clean it up by wiping w/ clean cloth, but be carefull not to damage the BOARD black electro terminal! Buy any LiQUiD ELECTRO COATiNG, and put on that VOLUME button and let it DRY! That might help u out!

You can get the manual on the link below.

http://audiovox2.info/docs/common/RCR312W/RCR312W_OM.pdf

Codes on this link below.

http://audiovox2.info/docs/common/RCR312W/RCR312W_OTHER_CL.pdf

Good Luck please rate 4 thumbs up and please leave a testimonial

You might check with Electronix, they carry the RCA universals: http://www.electronix.com

May I get the model # of the remote to help you more. Also if it is not an RCA can you give the brand

HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

Hi,
To get the code please go to below website

http://www.rcaaccessories.com/remotefinder/


Please
Provide model of your remote
device to be programmed (VCR,TV)

Thanx

hi! i have here a couple of codes for your tv! just try them 1004, 1007, 1018, 1027, 1047, 1056, 1057, 1059, 1060, 1061, 1103, 1124, 1145, 1150, 1153, 1279, 1296, 1387, 1464, 1483,1046, 1465,1150, 2092, 1464, 2408, 1465, 2260, 1027, 2064, 3105, 1124, 2078, 3088, 1296, 2213, 3147, 1145, 3095, hope this helps!!! goodluck!!!

http://www.xdiv.com/remotes/

You have to try another code....hope this was helpful...

You can find RCA remotes and codes at
http://www.rcaaccessories.com/rcaaccessories/RcaaccessoriesController.do?ACTION_TYPE_ID=ACTION_TYPE_CATEGORY&ACTION_CATEGORY_ID=STR_CATEGORY_UNIVERSAL_REMOTES
If your model of the RCA remote is not listed, let me know, but one of the 3 device remote codes should work for your TV.

Encrypted channels are not free, that's the idea. You buy access to the channel and they give you a password. you have to ask the broadcaster in your area for access.

You have turned on SAP sound. Switch your MTS TV sound back to main or standard or Stereo.
OK is used to choose your selection once you 'highlight' it with the arrow keys.
If you are having menu issues, unplug the TV for ten seconds, plug it back in and try the menu again. (you may have to reset your channels)

You need the sheet that came with the remote. If the manufacturer's codes do not work with your ??, then you need a more modern remote. The codes must ALREADY be in the remote to be used. The code is part of the REMOTE.
http://www.tvcodes.com/ may have the code for you.

You need the sheet that came with the remote. If the manufacturer's codes do not work with your ??, then you need a more modern remote. The codes must ALREADY be in the remote to be used. The code is part of the REMOTE.