SanDisk Sansa Fuze MP3 Player - Page 4 - Answered Questions & Fixed issues

Check the specification of your MP3 player to determine thetype of video file format it uses. Most common video files that MP3 players use are, AVI andWMV, there may be others such as FLV, MOV and DivX. If your player cannot play a video then it is an incompatiblevideo file format, then you need to convert that video file to a format thatyour MP3 player uses. Click on this link for instructions on converting videofiles for MP3 players :- http://www.fixya.com/support/r5874192-play_videos_mp3_player

Press the MENU button to bring up the main menu. Select Settings (four vertical slider controls). Select the sixth item on the menu, then select the sixth item on the submenu.

Hi,

Learn how to reset the your various San Disk models;

Resetting a Sansa Fuze+, Clip+, c200, e200, or e200R player:

1. Press and hold the Power/Menu button for approximately 20 seconds.
2. Release the Power/Menu button.
3. Press the Power/Menu button again to turn on the player.


Resetting a Sansa View, Fuze, or Clip player:

1. Slide and hold the Power switch up for approximately 20 seconds.
2. Release the Power switch.
3. To turn the player on, slide the Power switch up then release instantly.

Resetting a Sansa Express player:

NOTE: The device can be either ON of OFF.

1. Press-and-hold the Volume Up (+) and Select buttons simultaneously for approximately 20 seconds.
2. Release the buttons.

Good luck.

factoryu reset is the only option

I'm not a sandisk expert so i'll direct you to a thread that may help you out.. http://forums.sandisk.com/t5/Fuze/White-screen/td-p/109153/highlight/true

hope that resolves your probem...

Please follow these steps:
1. Press and hold the Back button on touchpad to return to the Main Menu.
2. Tap on the Right touch point until you get to last menu item, which is Settings.
3. Tap the Center touch point to select Settings.
4. Scroll down until you find USB mode and select the item above it. The Language Setting selection is one item above USB Mode.

I hope this help you find the language.
Thanks.
gylacz

I give you this link where you can download the manual from:

http://mp3support.sandisk.com/sansa/UserManual/FUZE/fuze_userguide_en.pdf

I hope this guide will be useful for you.
Thanks.
gylacz

It sounds like it's time for a new battery. Here is your battery:
http://cgi.ebay.com/550mAh-Battery-SanDisk-Sansa-Fuze-2GB-4GB-8GB-/200582416758
If replacing the battery doesn't get this player up and running, you will need to contact Sandisk for repair or replacement of your player.

• Website: http://www.sandisk.com/consumer-products/
• Address: 601 McCarthy Boulevard, Milpitas, CA. 95035
• Phone: 1-866-726-3475
• Email: [email protected]

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Check the specification of your MP3 player to determine thetype of video file format it uses. Most common video files that MP3 players use are, AVI andWMV, there may be others such as FLV, MOV and DivX. If your player cannot play a video then it is anincompatible video file format, then you need to convert that video file to aformat that your MP3 player uses. Click on this link for instructions on converting videofiles for MP3 players :- http://www.fixya.com/support/r5874192-play_videos_mp3_player

I would return the item for exchange covered under the warranty, it is clear this is a manufacture issue.

Its very easy...here is a link to a user manual.

It isnt the exact brand but all mp3 players are the same basic instructions:

http://mp3support.sandisk.com/downloads/um/c200v2-um-eng.pdf

Its very easy...here is a link to a user manual.

It isnt the exact brand but all mp3 players are the same basic instructions:

http://mp3support.sandisk.com/downloads/um/c200v2-um-eng.pdf

You need to use the supplied Sansa Media Converter program to convert your photos (and videos) to a format the Sansa can handle. If you don't have the SMC, you can download the Windows version from http://www.megaupload.com/?d=3IPZO6Q0

Have you tried the different USB settings available on your Fuze? On the Fuze select Settings / System Settings/ USB Mode. If yours is set on MSC try MTP & visa versa. That may fix you up.

Hi mzcowans64,

You can get the cord in any shot which sells MP3 players.

I would recommend you to check in a store from where this MP3 player was bought or any shop which sells sandisk Mp3 players.

Hope this helps...:)

It is very possible that the problem lies with your headphones and not the player. Have you tried to use a different set of headphones to see if that fixes the problem?

Press the MENU button. Select Settings (four vertical sliders) and press the button at the middle of the wheel. Select the sixth item on the menu and press the middle button. Select the sixth item on the submenu and press the middle button. Select "English" at the top and press the middle button.

http://www.sandisk.com/sandisk-support/driver-download-wizard Download the sansa updater and you will get the manual and Media CONVERTER and any new firmware updates+
Recovery Mode: download the update software and install then lock your sansa hold in the rec key on the left at the same time push the menu/power button this will take you to recovery mode then connect to the computer Start the update software if it doesn't start automatic goto /start /all programs /Sandisk/sansa updater/ sansa updater and start it up manually... follow instructions on the updater and the sansa

hi mileeashford, are you still planning to fix your fuze? we have the same case tho the problem with my fuze is the thumb wheel. and i also can't find spare parts in the p.i.

You need to use the supplied Sansa Media Converter program to convert your pictures (and videos). If you've misplaced the SMC, you can download the Windows version from
http://www.megaupload.com/?d=3IPZO6Q0