Top 20 Logitech Harmony 510 Advanced Universal Remote Control Questions & Answers

use menu button change and save

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/

Observe these instructions to connect your wireless Logitech PS2 controller to the receiver :-

1. Verify that the PlayStation 2 console is connected to the receiver.
2. Switch on the PlayStation 2.
3. Replace the controller's batteries.
4. For roughly 2 seconds, press and hold the receiver's sync button.
5. Press and hold the controller's X button for 5 seconds.
6. To verify a connection to the receiver, the controller LED should flash rapidly.

Try the following if the controller won't connect :-

• Double-check the placement of the batteries.
• Experiment with various batteries.
• Bring the controller up to eye level with the receiver. Try rebooting your PlayStation 2.

Try getting help from Logitech customer service if you're still having issues attaching the controller . Here are some extra pointers :-

• Verify that no other controller is currently using the receiver.
• Verify that no other wireless devices are present that could interfere with the connection.
• You might need to utilise an adaptor to connect the receiver if you're using a PS2 Slim.

The Logitech Z-340 control pod or a compatible controller can be found in a few different places. Here are a few options:

1. Logitech website: You can check the Logitech website to see if they still carry the control pod or compatible controller for the Z-340.
2. Online retailers: You can check online retailers such as Amazon, eBay, and Best Buy to see if they have the control pod or compatible controller in stock.
3. Specialized Electronic retailers: Some specialized electronic retailers like B&H, Newegg, and Fry's may have the control pod or compatible controller.
4. Local electronics stores: You can check local electronics stores in your area to see if they have the control pod or compatible controller in stock.
5. Second-hand marketplaces: You can also try checking second-hand marketplaces like Craigslist, Facebook Marketplace, and OfferUp to see if someone is selling a used control pod or compatible controller.

It's important to note that, if you decide to go for a non-Logitech controller, you should make sure it's compatible with your Logitech Z-340. And it's best to check the compatibility before buying the controller.

I'm sorry to hear that your Logitech 610 remote is stuck in safe mode. Here are a few steps you can try to try to resolve the issue: 1. Make sure you are using new, high-quality batteries. 2. Try resetting the remote by removing the batteries, pressing all of the buttons, and then reinserting the batteries. 3. If the issue persists, try connecting the remote to the Logitech Harmony software on your computer using the supplied USB cable. This will allow you to access more advanced troubleshooting options. I hope this helps! Let me know if you have any other questions or if there is anything else I can do to assist you.

Take the batteries out for 5 minutes and refit them.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily... http://remotesearch.blogspot.com/ https://elektrotricks.blogspot.com/ https://electrohelponline.blogspot.com/ https://homenol.blogspot.com/

You can buy it from Amazon

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. {View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}...

https://www.logitech.com/assets/44640/3/harmony900-user-guide.pdf https://www.logitech.com/assets/44640/3/harmony900-user-guide.pdf

they are non repairable. you try turning of computer revel keyboard wireless adapter restart machine install wireless adapter and the key board. if there is no change toss and buy another one.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. https://homenol.blogspot.com/ https://remotesearch.blogspot.com/ https://electronicshelponline.blogspot.com/ https://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device./

SEE THIS: logitech 650 universal remote spectrum cable Google Search Also see this SPECTRUM Tech Support (and ask them!) https://www.timewarnercable.com/en/support/overview.html AND THIS How-to and Product VideosLink may help too (sorry about the CAPS)! How to and Product Videos and THIS: Cable Box Equipment Manuals: https://www.timewarnercable.com/en/support/equipment-manuals.html Anthony

https://www.logitech.com/assets/44645/13/harmonyone-user-guide.pdf You must press the DEVICE button to select among the just what the remote may control. Once you select which one, the other controls on the remote (such as PLAY) work. Page 11 of the guide above mentions this device button. Note that when you are finished using the DVD, you may have to select DEVICE again to select the TV so the buttons will then control the TV. Old remotes require you to enter codes to operate extra devices and indeed the TV but I think your remote may not require such.

Utube will help

Plug into computer and go to the website and reprogram

Go to this link for help getting the oritingal remote. http://www.remotes.com/?gclid=Cj0KEQjwkZfLBRCzg-69tJy84N8BEiQAffAwqhsxmuekDC3WDO0f_hlRwh5p4-VmeDG9MvedyOUUdpkaAojB8P8HAQ

No remote code for universal exists, you must use the logitech remote