20 Most Recent
Dacor DMT2420SS Microwave Oven - Page 2 Questions & Answers
Hey, i just used my dacor microwave and
Probably just lack of cleaning.Quite
often this is due to grease or food particles stuck somewhere in the
cavity of the oven or stuck on or behind the waveguide cover.
It may also be in the
area of the turntable support, coupler, or motor.
The
waveguide cover (also called a spatter shield) is usually about the
size of a playing card and often held in place by a plastic rivet.
It can be fragile, and
the metal edges of the oven behind it can be sharp, so be careful!
The cover and the metal
behind it should be cleaned with a mild, non-ammonia cleaner.
If there is any damage to the cavity, the area will
first have to be sanded smooth and
cleaned and dried thoroughly.
If the cavity metal of
the oven is cracked or split, you can use a small amount
of steel-based epoxy such as JB-WELD
to patch the crack or hole.
Once that dries
thoroughly, you can sand it very smooth.
Then you can apply some
high-temperature appliance paint, available from places like Wal-Mart,
Lowe's or Builder's Square.
If your
waveguide cover
is burned, it will need to be replaced.It provides critical
protection for the magnetron.You can order Dacor parts by part number from
the Pros here.I would have been happy to link to the service manual if you had provided the model number.On the off chance that it's a DMT2420, the service manual is
here and the parts list is
here.
My Dacor Microwave display is
This is a failure in the backlight circuit and/or a display segment failure.
Both are regularly repaired with our $39.95 service. Details are here.
I was cooking food for 1 minute and it just shut
Check your other appliance. You may have tripped a break. If they are all functioning, and you have no dead outlets in your kitchen, then the unit will need to be serviced. Hope it's the breaker.
a 1200w microware will draw 10 amps all by itself. Your outlets are most likely on 15 amp breakers, so it wouldn't take much amp draw from another kitchen appliance to trip the breaker.
Control panel not working but little chef guy
We regularly repair these control units for $39.95 in most cases. Details are
here.
Or you can buy a new control unit (part number
101871) for
$244.36 from
the Pros here.
We're
happy to help you with free advice and we'd appreciate your thoughtful
rating of our answer.
We can't get our microwave to fully pop the bag of
Always place the bag of popcorn on an upside-down paper plate.
This allows more microwaves to penetrate the bag from the bottom.
Also always place food of any kind in the microwave off-center on the tray, NOT in the middle of the tray.
Not only does it cook more evenly (think of how you stir liquid) but it also prevent the same spot from being heated repeatedly on the glass turntable, which can lead to overheating and breakage.
We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
Dacor DMT2420S Microwave has light
Simple fix.
You need to replace the bottom door switch, or repair its loose or broken mount.
See this
help file on door switches, and refer to the
service manual here for disassembly help.
You can find part numbers
here and order Dacor parts (by part number only)
here.
If a switch is all you
need, we offer a universal type for only $5 postpaid which you can
order here.We're
happy to help you with free advice and we'd appreciate your thoughtful
rating of our answer.
Not finding what you are looking for?