Top 20 Bosch Nexxt 500 Plus WFMC5301UC - Page 6 Questions & Answers

BAD CONTROL BOARD??

It is a good machine and still has life. The most likely cause is loose or broken damper springs. You would need to remove the top to check. If it feels loose at the back, (the front of the drum moves up and down), it is likely the rear bearing. https://www.google.com/search?q=Bosch+wkm41+parts ..

possibly a bad control board .

https://iinjaz-alkhalj.com/

The Start/Pause button merely pauses or reactivates the Child Lock feature. With the Child Lock feature paused by pressing and holding the Start/Pause button for 5 seconds, press Menu. Then press the Change button. For details see the manual. The relevant details are here: https://www.manualslib.com/manual/19306/Bosch-Logixx-9.html?page=22#manual . I hope this helps. Cindy Wells

POSSIBLY IT HAS A BAD CONTROL BOARD .

What does the F43 blunder mean in Bosch clothes washer? It shows that the engine doesn't turn or something blocks the drum.

POSSIBLY THE CONTROL BOARD HAS A PROBLEM

Time to get an engineer to fit a new heating element.

Old Navy wants too much for free . we diyers learn by doing for our selves .when I can not fix I either junk it and get new or call the local repair service to have it cat least checked out .

Damaged or defective door lock

call a local repair service sounds like the transmission has gone the trip

Lower the drain hose into a bucket. It must be lower than the kickplate.

If your washer isn't spinning properly , it could be because of an unbalanced load, which makes it harder for the drum to spin. An unblanced load also cause errors. "Ub" or "Ur" display is one of the sign that your washer is unbalanced. This may be because the washer is lopsided or because the load inside is uneven.

Bearings worn out

E3 error code indicates here that the washing machine has detected that the door on your washing machine is not shut and that can not start a wash cycle. If the door is shut and the E3 error still keeps on occurring that means the machine is unable to lock the door to begin a wash cycle and requires service to be repaired.

who set it and why I am old school and when dad said do not do something neither of our kids would test me but neither one ever got a spanking either

The door lock could be damaged or defective.

could be motor brushes are worn, they wear out after 5years or so.

E3 means there is an error with the water level sensor.